• Refer all installation work to the dealer from
whom the speaker was purchased. Installation
work requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
• Install the speaker only in a location that can
structurally support the full weight of the unit and
mounting bracket. Doing otherwise may result in
the speaker falling down and causing personal
injury and/or property damage.
• Since the unit is designed for in-door use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in personal
injury. Also, when it gets wet with rain, there is a
danger of electric shock.
• Donotuseothermethodsthanspeciedtoinstall
the speaker. Extreme force is applied to the speaker
and the speaker could fall off, possibly resulting in
• Use screws that are appropriate for the ceiling's
material and structure. Failure to do so may cause
the speaker to fall, resulting in material damage and
possible personal injury.
• Ensure that all screws are securely tightened. If
they are loose after installation, the speaker could
fall down, possibly resulting in personal injury.
ThankyouforpurchasingTOA’sCeilingMountSpeaker.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
Traceability Information for Europe
7-2-1,Minatojima-Nakamachi,Chuo-ku,Kobe,Hyogo,
Authorizedrepresentative:
TOAElectronicsEuropeGmbH
Suederstrasse282,20537Hamburg,
1. SAFETY PRECAUTIONS 1 .............................
2. GENERAL DESCRIPTION AND FEATURES ... 2
3. INSTALLATION 3 ............................................
4. WIRING DIAGRAMS 4 ....................................
5. FREQUENCY RESPONSE (1 W, 4 M) 4 .........
6. SPECIFICATIONS 5 ........................................
