TOA PC-648R Manual

TOA Højttaler PC-648R

Læs gratis den danske manual til TOA PC-648R (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 25 anmeldelser. Har du et spørgsmål om TOA PC-648R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

• Install the unit only in a location that can

structurally support the weight of the unit and the

mounting bracket. Doing otherwise may result in

the unit falling down and causing personal injury

and/or property damage.

• Since the unit is designed for in-door use, do not

install it outdoors. If installed outdoors, the aging of

parts causes the unit to fall off, resulting in personal

injury. Also, when it gets wet with rain, there is a

danger of electric shock.

Indicates a potentially hazardous situation

which, if mishandled, could result in moderate

or minor personal injury, and/or property

damage.

CAUTION

• Avoid touching the unit's sharp metal edge to

prevent injury.

• To avoid electric shocks, be sure to switch off the

amplifier's power when connecting speakers.

• Do not operate the unit for an extended period of

time with the sound distorting. This is an indication

of a malfunction, which in turn can cause heat to

generate and result in a fire.

PC-648R PC-658R

6 W (100 V line), 3 W (70 V line)

100 V line: 1.7 k (6 W), 3.3 k (3 W), 10 k (1 W) Ω Ω Ω

70 V line: 1.7 k (3 W), 3.3 k (1.5 W), 10 k (0.5 W) Ω Ω Ω

90 dB (1 W, 1 m)

100 – 18,000 Hz (at 20 dB below peak) 65 – 18,000 Hz (at 20 dB below peak)

12 cm (5") cone type 16 cm (6") cone type

ø145 ±5 mm (5.71" ±0.2") ø170 ±5 mm (6.69" ±0.2")

5 – 25 mm (0.2" – 0.98")

Spring clamp

Baffle: polypropylene resin, white (RAL 9016 equivalent)

Grille: Surface-treated steel plate net, white (RAL 9016 equivalent), paint

ø168 x 77 (d) mm (ø6.61" x 3.03") ø192 x 73 (d) mm (ø7.56" x 2.87")

470 g (1.04 lb) 500 g (1.1 lb)

Paper pattern ........ 1

2. SPECIFICATIONS

Note: The design and specifications are subject to change without notice for improvement.

Model No.

Rated Input

Rated Impedance

Sensitivity

(500 – 5,000 Hz, pink noise)

Frequency Response

Speaker Component

Dimensions for Fixing Hole

Ceiling Thickness for Mounting

Speaker Mounting Method

Finish

Dimensions

Weight

Accessory

Indicates a potentially hazardous situation

which, if mishandled, could result in death or

serious personal injury.

WARNING

Thank you for purchasing TOA's Ceiling Mount Speaker.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

PC-648R

PC-658R

CEILING MOUNT SPEAKERS

INSTALLATION MANUAL

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read

all the instructions in this section for correct and

safe operation.

• Be sure to follow all the precautionary instructions

in this section, which contain important warnings

and/or cautions regarding safety.

• After reading, keep this manual handy for future

reference.

• Do not use other methods than specified to mount

the bracket. Extreme force is applied to the unit

and the unit could fall off, possibly resulting in

personal injuries.

3-2. Change the input impedance as needed.

The speaker's input is factory-preset to 1.7

k . Ω

When changing the input impedance, detach

the black wire connected to the matching

transformer, and reinsert it into the desired

input tap referring to the table below.

Step 4. Push the panel surface into the mounting

hole.

4. INSTALLATION

Step 1. Using the supplied paper pattern as a guide,

open a mounting hole of the dimension

specified below in the ceiling.

5. WIRING DIAGRAMS

Step 2. Hook the speaker mounting spring into the

mounting hole in the ceiling.

Step 3. Make wiring.

3-1. Connect the speaker cable (from the

amplifier) referring to the figure below.

Connect its HOT line to the black lead wire,

and COM line to the white one.

8 Ω

10 kΩ

3.3 kΩ

1.7 kΩ*

* Factory-preset

COM (white)

HOT (black)

Matching

transformer

COM

3. GENERAL DESCRIPTION

Integrated with a resin panel and speaker frame, the

PC-648R and PC-658R are the ceiling mount

speakers with a metal grille attached.

They feature spring clamp mechanism for easy

speaker mounting to the ceiling.

The input impedance can be easily changed by

changing the tap position of the transformer.

133-01-00081-00

URL: http://www.toa.jp/

Traceability Information for Europe

Manufacturer:

TOA Corporation

7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,

Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg,

Germany

Ceiling

5 – 25 mm

(0.2” – 0.98”)

øA

Model No. øA

PC-648R ø145 ±5 mm (ø5.71" ±0.2")

PC-658R ø170 ±5 mm (ø6.69" ±0.2")

Ceiling

Speaker mounting

spring

The figure shows PC-648R.

Matching

transformer

COM (White)

HOT (Black)

3.3 kΩ

10 kΩ

1.7 kΩ

HOT (Black)

COM (White)

Impedance 1.7 kΩ Ω3.3 k 10 kΩ

100 V line 6 W 3 W 1 W

70 V line 3 W 1.5 W 0.5 W

Produkt Specifikationer

Mærke:	TOA
Kategori:	Højttaler
Model:	PC-648R
Bredde:	168 mm
Dybde:	168 mm
Højde:	77 mm
Vægt:	470 g
Antal pr. pakke:	1 stk
Produktfarve:	Hvid
Bluetooth:	Ingen
Udgangseffekt (RMS):	6 W
Husmateriale:	Polypropylene (PP), Steel
Anbefalet brug:	Intercom system
Frekvensområde:	100 - 18000 Hz
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	- kanaler
Højttaler, placering:	Kan monteres i loftet
Driver diameter:	120 mm
Sensitivitet:	90 dB
Forstærker:	Ingen