TOA PE-154EN Manual

TOA Højttaler PE-154EN

Læs gratis den danske manual til TOA PE-154EN (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om TOA PE-154EN, eller vil du spørge andre brugere om produktet?

Side 1/8
PENDANT SPEAKER PE-154EN
Thank you for purchasing TOA's Pendant Speaker.
Please carefully follow the instructions in this manual to ensure long, trouble-free use
of your equipment.
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
INSTRUCTION MANUAL
1. SAFETY PRECAUTIONS ........................... 1
2. GENERAL DESCRIPTION
AND FEATURES ......................................... 2
3. IMPEDANCE CHANGE .............................. 2
4. INSTALLATION .......................................... 3
5. DIMENSIONAL DIAGRAM ......................... 4
6. WIRING DIAGRAM...................................... 4
7. FREQUENCY RESPONSE (1 W, 4 m) ....... 5
8. SPECIFICATIONS ...................................... 5
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS
Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
After reading, keep this manual handy for future reference.
When Installing the Unit
Refer all installation work to the dealer from whom
the speaker was purchased. Installation work
requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
Install the speaker only in a location that can
structurally support the full weight of the unit and
mounting bracket. Doing otherwise may result in
the speaker falling down and causing personal
injury and/or property damage.
Since the unit is designed for in-door use, do not
install it outdoors. If installed outdoors, the aging of
parts causes the unit to fall off, resulting in personal
injury. Also, when it gets wet with rain, there is a
danger of electric shock.
Do not use other methods than specified to install
the speaker. Extreme force is applied to the
speaker and the speaker could fall off, possibly
resulting in personal injuries.
Use screws that are appropriate for the ceiling's
material and structure. Failure to do so may cause
the speaker to fall, resulting in material damage
and possible personal injury.
Ensure that all screws are securely tightened. If
they are loose after installation, the speaker could
fall down, possibly resulting in personal injury.
Indicates a potentially hazardous situation which,
if mishandled, could result in death or serious
personal injury.
WARNING
Speaker
2
2. GENERAL DESCRIPTION AND FEATURES
The PE-154EN is certified according to the European Standard EN 54-24: 2008 and the International
Standard ISO 7240-24: 2010.
The PE-154EN is a pendant speaker designed for ceiling suspension installations.
Considered in architectural design, it can blend in with lighting equipment.
A directly-attached 5 m (16.4 ft) speaker cord allows the speaker to be suspended from the high ceiling.
The speaker is driven on high-impedance (100 V and 70 V) line, and its input power (impedance) can be
easily switched.
Note
Never dismantle the PE-154EN in any way even for repainting reason. Since the PE-154EN is certified in the
form of complete assembly by the above-mentioned standards, it does not meet these standards if
dismantled.
3. IMPEDANCE CHANGE
The input power (impedance) is factory-preset to 15 W (670 Ω) for 100
V line and 7.5 W (670 Ω) for 70 V line.
When changing this setting, use a standard screwdriver to rotate the
rotary switch on the upper side of the speaker to the desired position.
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
CAUTION
Do not mount the speaker in locations exposed to
constant vibration. The speaker or its mounts can
be damaged by excessive vibration, potentially
causing the speaker to fall, which could result in
personal injury.
Do not use anti-rust lubricant. If it contacts resin or
rubber parts, they could deteriorate and cause the
speaker to fall, possibly resulting in personal injury.
Do not install the speaker in indoor swimming pools
or such locations where liquid chemicals are used.
The parts deteriorate if corroded, causing the
speaker to fall, which could result in personal
injury.
When the Unit is in Use
If any of the following irregularities occurs,
immediately switch off the amplifier's power, and
inform the shop from where the speaker was
purchased. Further using the speaker may result in
fire or electric shock.
· If you detect smoke or a strange smell coming
from the speaker
· If water or any metallic object gets into the
speaker
· If the speaker falls, or the speaker case breaks
To prevent a fire or electric shock, never open nor
remove the speaker case. Refer all servicing to
your nearest TOA dealer.
When Installing the Unit
Avoid touching the speaker's sharp metal edge to
prevent injury.
To avoid electric shocks, be sure to switch off the
amplifier's power when connecting speakers.
When the Unit is in Use
Do not operate the speaker for an extended period
of time with the sound distorting. Doing so may
cause the speaker to heat, resulting in a fire.
Do not stand or sit on, nor hang down from the
speaker as this may cause it to fall down or drop,
resulting in personal injury and/or property
damage.
Have the speaker checked periodically by the shop
from where it was purchased. Failure to do so may
result in corrosion or damage to the speaker or the
mounts that could cause it to fall, possibly causing
personal injury.
Impedance 670 Ω 1 kΩ 2 kΩ
100 V line 15 W 10 W 5 W
70 V line 7.5 W 5 W 2.5 W
Bold figures represent factory-preset values.
Notes
Switch off the amplifier's power when changing the input power.
No sound is output when the switch is set to the OFF position.


Produkt Specifikationer

Mærke: TOA
Kategori: Højttaler
Model: PE-154EN
Bredde: 186 mm
Dybde: 186 mm
Højde: 251 mm
Vægt: 2100 g
Antal pr. pakke: 1 stk
Produktfarve: Hvid
Ledningslængde: 5 m
Bluetooth: Ingen
Udgangseffekt (RMS): 15 W
Frekvensområde: 70 - 20000 Hz
Forbindelsesteknologi: Ledningsført
Lyd-output kanaler: - kanaler
Højttaler, placering: Kan monteres i loftet
Antal drivere: 2
Diskanthøjttaler: Ja
Antal drivere til diskant: 1
Sensitivitet: 91 dB
Diskant diameter: 1 "
Bashøjttaler: Ja
Antal bashøjttalerdrev: 1
Forstærker: Ingen
Woofer diameter (britisk mål): 5 "

Har du brug for hjælp?

Hvis du har brug for hjælp til TOA PE-154EN stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler TOA Manualer

TOA

TOA HY-W0801W Manual

7 Oktober 2025
TOA

TOA BS-678 Manual

7 Oktober 2025
TOA

TOA SR-SB8 Manual

7 Oktober 2025
TOA

TOA SR-WB4WP Manual

7 Oktober 2025
TOA

TOA SR-A12S Manual

7 Oktober 2025
TOA

TOA F-08WT Manual

7 Oktober 2025
TOA

TOA PE-154EN Manual

7 Oktober 2025
TOA

TOA PJ-64 Manual

7 Oktober 2025
TOA

TOA PW-1430DB Manual

7 Oktober 2025
TOA

TOA F-2352CU2 Manual

7 Oktober 2025

Højttaler Manualer

Nyeste Højttaler Manualer