Tomy TDV450 Manual

Tomy Babyalarm TDV450

Læs gratis den danske manual til Tomy TDV450 (7 sider) i kategorien Babyalarm. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Tomy TDV450, eller vil du spørge andre brugere om produktet?

Side 1/7
Multi Camera Monitoring
Adding multiple camera units to the Tomy Video Plus Monitor TDV450.
GB
Caméras multiples
Ajout de multiples caméras à l’écoute-bébé
Digital Video Plus TDV450 de Tomy.
F
Monitoring met verschillende camera’s
Toevoegen van verschillende camera-units aan de
Tomy Video Plus Babyfoon TDV450.
NL
Überwachung mit mehreren Kameras
So schließen Sie mehrere Kameras an das
Tomy Babyphone Video Plus TDV450 an.
D
Instructions
Notice d’emploi
Gebruiksaanwijzing
Bedienungsanleitung
TE/M6C RP
06/10
Ref. No. 71481
Made in China
Fabriqué en Chine
GB
• SET UP
Each Camera Unit is mains (AC) powered. Ensure each unit is connected to a suitably located domestic mains supply
using the adaptor supplied.
It is possible to pair up to four camera units to any one parent unit, however connecting each additional camera
unit must be conducted individually (one after another) and not simultaneously.
Although it is possible to connect multiple camera units to any parent unit, it is only possible to watch one camera
at any time. Full instructions for switching between Camera units are given below.
CONNECTING ADDITIONAL CAMERA UNITS TO YOUR EXISTING MONITOR
a. With the existing monitor (camera and parent unit) correctly set-up and operating as normal, activate
the new Camera unit by pressing and holding the ON/OFF Button for more than 2 seconds.
b. Once active, press and hold the new Camera Units ON/OFF Button and Nightlight buttons together
until both buttons start to flash.
WITHIN 60 SECONDS OF THE ABOVE;
c. Enter the Parent Units ‘Multi Camera Monitoring’ sub menu.
d. Scroll along to the ‘Add a Camera’ (“+”) screen and press the ‘select’ button, at which point the Parent
Unit shall enter ‘connect mode’ indicated by the ’connection sequence’ (shown below).
Add a Camera Connection Sequence
e. Once successfully connected the ‘connection sequence’ shall automatically be replaced by the Video Feed
from the newly connected monitor.
f. If a connection is unsuccessful repeat the above, ensuring steps b – d are conducted with 60 seconds of
each other. Also try switching the existing Camera unit(s) OFF until a connection is made.
SWITCHING BETWEEN CAMERA UNITS
With more than one camera connected (and activated), it is necessary to switch feeds between camera units using
the following steps:
a. Enter the Parent Units ‘Multi Camera Monitoring’ sub menu.
b. The currently selected camera (number) will be displayed.
c. Scroll across the additional cameras, pressing the select button to view your desired video feed.
Interference may occur if the Camera units are located within close proximity to each other.


Produkt Specifikationer

Mærke: Tomy
Kategori: Babyalarm
Model: TDV450

Har du brug for hjælp?

Hvis du har brug for hjælp til Tomy TDV450 stil et spørgsmål nedenfor, og andre brugere vil svare dig