Toolland PH340 Manual

Toolland Ikke kategoriseret PH340

Læs gratis den danske manual til Toolland PH340 (17 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Toolland PH340, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/17

PH340/PH360

USER MANUAL 2

HANDLEIDING 4

MODE D'EMPLOI 6

MANUAL DEL USUARIO 8

BEDIENUNGSANLEITUNG 10

INSTRUKCJA OBSŁUGI 12

MANUAL DO UTILIZADOR 14

PH340/PH360

V. 01 05/12/2018 2 ©Velleman nv –

USER MANUAL

1. Introduction

Thank you for choosing Toolland. Please read the manual thoroughly before bringing this

device into service. If the device was damaged in transit, do not install or use it and contact

your dealer.

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

2. Safety Instructions

Safety gloves are required while operating this machine.

 CAUTION The edges of cut tiles are sharp. –

 Always keep the appliance away from any crash and corrosive liquid.

 This tile-cutting machine is fitted with a replaceable circular blade. Keep the tile cutter and

blade away from children.

 After use, the appliance must be stored in a safe and dry place.

 This appliance is designed for cutting and breaking glazed tile, and shall not be used for

any other purpose.

 When using the appliance, always keep extension leads away from the machine.

 Always place the appliance on a level and firm surface.

3. Operation

1. Place the tile on the cutter bed. Set the guide to the width of the tile.

2. Position the tile-cutter wheel on the base of the tile to be cut.

Score the tile by moving the handle forward away from you while pressing down – –

lightly. K steady pressure for the full length of the tile. eep a

At the end of the score, the wheel will bump against the buffer. Make sure the anvil sits

over the score line.

3. Press down slightly applying increasing pressure until the tile snaps. Tip: Press the handle

with one hand and hold the base of the tile with the other.

Produkt Specifikationer

Mærke:	Toolland
Kategori:	Ikke kategoriseret
Model:	PH340

Har du brug for hjælp?

Hvis du har brug for hjælp til Toolland PH340 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Toolland Manualer

Toolland 2002-200 Manual

8 December 2024

Toolland WHORW2T Manual

8 December 2024

Toolland WEH300 Manual

8 December 2024

Toolland QT113 Manual

8 December 2024

Toolland QT123 Manual

8 December 2024

Toolland VL104 Manual

24 August 2024

Toolland DT20008N Manual

17 August 2024

Toolland DTB10000 Manual

17 August 2024

Toolland AC06 Manual

16 August 2024

Toolland DT20016N Manual

15 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

2N Telecommunications EasyGate Pro Manual

11 Juli 2025

Sitecom CH-1105 Manual

11 Juli 2025

Yamazen OSG-65R Manual

11 Juli 2025

Yamazen YMW-3 Manual

11 Juli 2025

Universal Audio Apollo x8p Gen 2 Manual

11 Juli 2025

Icon RealTime Portal Manual

11 Juli 2025

InfiRay RICO Mk2 LRF RH50R Manual

11 Juli 2025

Microchip MCP48FEB18 Manual

11 Juli 2025

Yamazen GCB-3 Manual

11 Juli 2025

Yamazen MNR-12604CJ Manual

11 Juli 2025