Toolland WHORW2T Manual

Toolland Ikke kategoriseret WHORW2T

Læs gratis den danske manual til Toolland WHORW2T (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Toolland WHORW2T, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
WHORW2T/WHORW4T
EN
HORIZONTAL WINCH
NL
HANDLIER HORIZONTAAL
FR
TREUIL HORIZONTAL
ES
CABRESTANTE HORIZONT AL
DE
HANDSEILWINDE
PL
WYCIĄGARKA POZIOMA
PT
POLIA DE MÃO HORIZONTAL
USER MANUAL 2
GEBRUIKERSHANDLEIDING 4
MODE D’EMPLOI 6
MANUAL DEL USUARIO 8
BEDIENUNGSANLEITUNG 10
INSTRUKCJA OBSŁUGI 12
MANUAL DO UTILIZADOR 14
WHORW2T/WHORW4T
V. 02 07/02/2017 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should
be taken to a specialized company for recycling. This device should be returned to your distributor or to
a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Always inspect the cable throughout its length for kinks, frays or any damage before each use.
Do not pull the cable around a corner.
Fix load securely; do not wrap winch cable around load.
Do not pull more than rated load. Never overload the winch.
Never lengthen the lever using a pipe for additional leverage. This can cause the winch lever to bend or
break.
Operate winch with at least 3 wraps of cable on spindle.
Always use an adequate sling, eyebolt or other accessory attached to the load to be pulled. Make sure there
is positive engagement of the winch hook to the load.
Do not lift any loads with this winch.
3. Description
4. Extending the Cable
Secure the winch to a rigid anchor point. Pull the drive pawl spring in the direction of the arrow (see fig. 2,
detail A). Raise the handle and hold it firmly into position (see fig. 2, detail C). Press the stop pawl in the
direction of the arrow (see fig. 2, detail D) and pull until the desired slack is obtained.

Produkt Specifikationer

Mærke: Toolland
Kategori: Ikke kategoriseret
Model: WHORW2T

Har du brug for hjælp?

Hvis du har brug for hjælp til Toolland WHORW2T stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Toolland Manualer

Toolland

Toolland 2002-200 Manual

8 December 2024
Toolland

Toolland WHORW2T Manual

8 December 2024
Toolland

Toolland WEH300 Manual

8 December 2024
Toolland

Toolland QT113 Manual

8 December 2024
Toolland

Toolland QT123 Manual

8 December 2024
Toolland

Toolland VL104 Manual

24 August 2024
Toolland

Toolland DT20008N Manual

17 August 2024
Toolland

Toolland DTB10000 Manual

17 August 2024
Toolland

Toolland AC06 Manual

16 August 2024
Toolland

Toolland DT20016N Manual

15 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Life On Products

Life On Products LCAEA011 Manual

16 Juni 2025
Philips

Philips TAT2719 Manual

16 Juni 2025
Life On Products

Life On Products LCAF001 Manual

16 Juni 2025
Playtive

Playtive IAN 303900 Manual

16 Juni 2025
Planet Audio

Planet Audio PC35B Manual

16 Juni 2025
Philips

Philips SCF205 Manual

16 Juni 2025
Enrock Marine

Enrock Marine EMC56W Manual

16 Juni 2025
Playtive

Playtive IAN 115579 Manual

16 Juni 2025
Playtive

Playtive IAN 425617 Manual

16 Juni 2025
Life On Products

Life On Products LCAF017 Manual

16 Juni 2025