Topeak DeFender M1/M2 Manual

Topeak Ikke kategoriseret DeFender M1/M2

Læs gratis den danske manual til Topeak DeFender M1/M2 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Topeak DeFender M1/M2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

(Rear)

(Front)

DeFender M1

Tool required: 4 mm Allen key

Recommended Torque

2-4 Nm (17-35 in. lbs)

4mm

Allen key

Press to

install / release

Press to

install / release

Fits mm ø19.6 - ø26

DeFender M1 fits most standard

front forks. However, it will not

t forks with a crown thickness

over 60 mm (2.36") and is not

designed to be used with the 1.5"

headset standard.

Fits mm ø 27.7~ ø35

User's Guide

DeFender M1 / M2

M1 / M2

Prepare to Ride

CAUTION

When installing DeFender M1 with

suspension forks, make sure no part of

the fork comes in contact with the

DeFender M1 during its travel length.

Otherwise damage to your bike or

DeFender M1 may occur and it may also

cause bodily injury.

Back viewBack view

DeFender M1

IMPORTANT NOTES

Fits mmFits mm ø 27.7~ ø35 ø19.6 ~ ø26

Wedge

Set

thickness mm60

M-TC9617-18-GB 11/09

SLIP JOINT CLAMP FITS ø25.4~ø31.2 mm and ø30.8~34.9 mm

WARRANTY

Topeak roducts are available only from professional bicycle shops.p

Please contact your nearest Topeak authorized bicycle dealer for any questions. For customers in the USA, call: 1-800-250-3068, Website: www.topeak.com

2-year Warranty: All mechanical components against manufacturer defects only.

Warranty Claim Requirements

To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture.

All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this operating

manual.

* The specications and design are subject to change without notice.

ANGLE ADJUSTMENT

Recommended Torque:

2-4 N.m (17~35 in. lbs.)

4mm

Allen key

4mm

Allen key

Toothed Nut

Angle Adjusting Bolt

Toothed Nut