TP-Link DS-PMA-C+ Manual

TP-Link Ikke kategoriseret DS-PMA-C+

Læs gratis den danske manual til TP-Link DS-PMA-C+ (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9 anmeldelser. Har du et spørgsmål om TP-Link DS-PMA-C+, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Remove the TransceiverInstall the Transceiver

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to

the transceiver.

2. Insert the transceiver into the slot and rmly press it into place.

3. Remove the protective dust plug from the transceiver.

4. Plug a ber-optic cable into the transceiver. Note that the transceiver

works without any additional conguration.

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to

the transceiver.

2. Disconnect the network ber-optic cable from the transceiver.

4. Reinstall the protective dust plug in the transceiver’s optical bores and

place it on antistatic mat or a static shielding bag.

3. Pull the safety latch downwards to release the transceiver, and then

pull it out from the slot.

Installation Guide

Note:

1. Do not touch the output pins on the transceiver with your hand.

2. Always keep the protective dust plug on the transceiver’s optical bores until you are ready to make a connection.

Caution:

DO NOT point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

SFP XGSPON&GPON Combo Class C+ Module

SFP GPON Class C++ Module

SFP GPON Class C+ Module

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

* Images may differ from actual products.

Connection

Safety Information

Keep the device away from water, re, humidity or hot environments.

Keep the device away from re or hot environments. DO NOT immerse in

water or any other liquid.

Do not attempt to disassemble, repair, or modify the device.

Avoid using this product during an electrical storm. There may be a remote

risk of electric shock from lightning.

Do not point or stare directly into the beam or into the optical port of the

transceiver when it is operating, as this can injure your eyesight.

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/30/EU,

2014/35/EU, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/support/ce/

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of the Electromagnetic

Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations

2016.

The original UK declaration of conformity may be found at

https://www.tp-link.com/support/ukca/

UKCA Declaration of Conformity

OLT ONU

DS-PMA-Combo C+

or DS-PMA-C++

or DS-PMA-C+

Fiber

Specications

Wave engthL

Standards and Protocols

C ba le

Fi er peb Ty

M C b Lax. a le ength

Data Rate

Tx Power

Rx Sensitivity

Extinction Ratio

Rx Saturation Optical

Power

Port peTy

Power Support

Safety & Emission

DDM

SFP-MSA

Hot Swappable

Normal

XGS-PON: Tx: 1577 nm, Rx: 1270 nm

XG-PON: Tx: 1577 nm, Rx: 1270 nm

GPON: Tx: 1490 nm, Rx: 1310 nm

ITU-T G.984.2 Amendment 2

Single-mode Fiber

9/125 um Single-mode

20 km

XGS-PON: Tx: 9953 Mbit/s, Rx: 9953 Mbit/s

XG-PON: Tx: 9953 Mbit/s, Rx: 2488 Mbit/s

GPON: Tx: 2488 Mbit/s, Rx: 1244 Mbit/s

XGS-PON: +5 dBm ~ +8 dBm

XG-PON: +5 dBm ~ +8 dBm

GPON: +3 dBm ~ +7 dBm

XGS-PON: <-29.0 dBm

XG-PON: <-30.5 dBm

GPON: <-32.0 dBm

XGS-PON: >8.2 dB

XG-PON: >8.2 dB

GPON: >8.2 dB

XGS-PON: >-8.0 dBm

XG-PON: >-10.0 dBm

GPON: >-12.0 dBm

Combo PON, SC

3.3 V (<±5%)

FCC 47 CFR Part 15, Class B

CE, Class B

Yes

GPON: Tx: 1490 nm, Rx: 1310 nm

ITU-T G.984.2 Amendment 2

Single-mode Fiber

9/125 um Single-mode

20 km

GPON: Tx: 2488 Mbit/s, Rx: 1244 Mbit/s

GPON: +5 dBm ~ +10 dBm

GPON: <-33.0 dBm

GPON: >8.2 dB

GPON: >-12.0 dBm

GPON SFP, SC/UPC

3.3 V (<±5%)

FCC 47 CFR Part 15, Class B

CE, Class B

Yes

GPON: Tx: 1490 nm, Rx: 1310 nm

ITU-T G.984.2 Amendment 2

Single-mode Fiber

9/125 um Single-mode

20 km

GPON: Tx: 2488 Mbit/s, Rx: 1244 Mbit/s

GPON: +3 dBm ~ +7 dBm

GPON: <-32 dBm

GPON: >8.2 dB

GPON: >-12.0 dBm

GPON SFP, SC/UPC

3.3 V (<±5%)

FCC 47 CFR Part 15, Class B

CE, Class B

Yes

DS-PMA-Combo C+ DS-PMA-C++

General Specications

DS-PMA-C+

PON Port

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Ikke kategoriseret
Model:	DS-PMA-C+
Produktfarve:	Rustfrit stål
Forbindelsesteknologi:	Ledningsført
Indgangsspænding:	3.3 V
Intern:	Ja
Maksimal dataoverførselshastighed:	2488.32 Mbit/s
SFP modtagertype:	Fiberoptisk
Grænsefladetype:	SFP
Fiber optisk strømstik:	SC, SFP
Fiber kabeldiametre understøttes (kerne/beklædning):	9/125 µm
Enkelttilstand fiber (SMF) understøttet:	Ja
Maksimal overførselsafstand:	20000 m
Bølgelængde:	1490 nm
Dataoverførselshastighed:	1244.16 Mbit/s
Hot-swap:	Ja
Fibertilstandsstruktur:	Enkeltilstand
Tx effekt (min.):	3 dBmW
Tx effekt (maks.):	7 dBmW
Rx effekt (min.):	-30 dBmW
Rx effekt (maks.):	-12 dBmW
Link budget:	8.2 dB
Tx bølgelængde (maks):	1490 nm
Rx bølgelængde (maks):	1310 nm