TP-Link KS200 Manual

TP-Link Ikke kategoriseret KS200

Læs gratis den danske manual til TP-Link KS200 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om TP-Link KS200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Wire Your Switch

Disconnect wires from the old switch.

Turn o the circuit breaker. Then remove

the old wallplate of the wall switch and

label the wires.

Connect the wires to the smart switch as

shown below.

Note: No need to distinguish between and wires.Line Load

Ground: Usually green or copper.

Neutral: Usually white, not connected to the dumb switch.

Line/Load: Usually black, and connected to the dumb

switch.

If you are unsure, consult a qualied electrician.

Line up the switch with the mounting

holes. Secure it with screws.

4Attach the wallplate. Then the wiring is

nished.

Set Up Your Switch

STEP 2 SET UP

Tap the button in the app and select Smart

Switches > Smart Switch HomeKit. Then

follow the step-by-step app instructions to set

up your smart switch.

DOWNLOAD APP

Get the app from the App Store Kasa Smart

or Google Play.

STE 1P

Smart Wi-Fi Light Switch

Quick Start Guide

*Images may dier from your actual product.

Appearance Button Explanations

Restart

Reset

Press and hold for about until the LED 5s

blinks amber and green to reset Wi-Fi

while keeping other settings.

Press to restart your switch.

Press and hold for about until the 10s

LED blinks amber to restore to factory

default settings.

LED Status

Starting up.Solid amber

Blinking amber

Blinking green

White

Solid red

Stay green for 30s

Blinking amber & green

Connecting to Wi-Fi.

Device resetting.

Light fixture is off.

Disconnected from Wi-Fi.

Connected to Wi-Fi.

On/O

Button

Restart

LED

Reset

Want to Add Switch to Home?

This is a HomeKit-enabled device. You can also

add it to the Home app for easy control from

your iPhone or iPad.

Failed to Add to Home?

Factory reset the switch, and restart your phone.

Then try again.

Refer to the FAQ for detailed instructions:

https://www.tp-link.com/support/faq/3390/

Before You Start:

1. Your phone should be connected to a stable 2.4

GHz Wi-Fi network with internet access.

2. HomeKit will be disabled 10 minutes after the

switch is powered on. You can press the Restart

button on your switch to restart and try again.

Add to Home

1. Open the Home app.

2. Scan the HomeKit QR code in the package, or

enter the PIN on the switch.

Specications

Safety Notice

Before installing, servicing or removing the switch, read and follow all safety

precautions including the following:

• CAUTION – Risk of Electric Shock – More than one disconnect switch may

be required to de-energize the equipment before servicing. A circuit breaker

which disconnects the Line and Neutral conductor simultaneously is suitable.

Ensure power is o at the circuit breaker before removing or installing any

switch. Use a non-contact voltage tester to ensure the power is o.

• The Smart Switch must be installed and used in accordance with the

National Electric Code (NEC) or your local electrical code. If you are

unfamiliar with these codes and requirements, or are uncomfortable

performing the installation, consult a qualied electrician.

• Do not install the Smart Switch with wet hands or when standing on wet or

damp surfaces.

• Install only in a suitable UL Listed outlet box (suitable dimensions:

H > 2.95 in./75 mm, W > 1.81 in./46 mm, D > 2 in./51 mm).

Rating: 120V~ 60Hz

Load: 600W Incandescent, 1/6 HP Motor

Operation temperature: 0~40℃

Method of mounting included: Independently mounted

(Vertically position only);

Operating control, Type 1.C action

Pollution Degree 2, Rated Impulse Voltage 2500 V

Software Class A, NEMA Type 1

High Voltage-Disconnect power supply before servicing

CAUTION

For technical support, the user guide and other information, visit

https://www.tp-link.com/support.

Support

Ready for setup;

Resetting Wi-Fi.

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Ikke kategoriseret
Model:	KS200

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link KS200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret TP-Link Manualer

TP-Link Omada SM5110LSA-10 Manual

14 Juli 2025

TP-Link DeltaStream DS-P7500-16 Manual

11 Juli 2025

TP-Link UE302C Manual

5 Juli 2025

TP-Link RE1750X Manual

1 Juli 2025

TP-Link Archer TBE6500U Manual

27 Juni 2025

TP-Link RE765X Manual

26 Juni 2025

TP-Link Archer TBE3600U Manual

26 Juni 2025

TP-Link Deco BE68 Manual

26 Juni 2025

TP-Link DS-PMA-C+ Manual

26 Juni 2025

TP-Link RE405BE Manual

26 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Zoom A3 Manual

16 Juli 2025

DS18 SLG-FKP6 Manual

16 Juli 2025

CYP PU-1201-KIT Manual

16 Juli 2025

JUNG 4008 TSM Manual

16 Juli 2025

Emko SMR1P1-00-00-01-00 Manual

16 Juli 2025

DS18 Hydro NXL-X6TP Manual

16 Juli 2025

CYP PUV-1350PL-TXWP Manual

16 Juli 2025

Audio Pro VOL-1 Manual

16 Juli 2025

CYP PUV-2010TXWP Manual

16 Juli 2025

Hillvert HT-VC-400 Manual

16 Juli 2025