TP-Link Omada SM5110LSA-10 Manual

TP-Link Ikke kategoriseret Omada SM5110LSA-10

Læs gratis den danske manual til TP-Link Omada SM5110LSA-10 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 2 anmeldelser. Har du et spørgsmål om TP-Link Omada SM5110LSA-10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Remove the moduleInstall the module

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to

the transceiver.

2. Insert the module into the SFP+ slot and rmly press it into place.

3. Remove the protective dust plug from the module.

4. Plug a ber-optic cable into the module. Note that the module works

without any additional conguration.

1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to

the transceiver.

2. Disconnect the network ber-optic cable from the module.

4. Reinstall the protective dust plug in the module’s optical bores and

place it on antistatic mat or a static shielding bag.

3. Pull the safety latch downwards to release the module, and then pull it

out from the slot.

Installation Guide

Note:

1. Do not touch the output pins on the transceiver with your hand.

2. Always keep the protective dust plug on the module’s optical bores until you are ready to make a connection.

Caution:

DO NOT point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.

10GBase-BX WDM Bi-Directional SFP+ LC Module

For technical support and other information, please visit

https://www.tp-link.com/support/?type=smb, or simply scan the

QR code.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com/business to join

TP-Link Community.

xplana on of the symbols on the product label�

ymbols may vary from products

Symbol

Explanation

Class II equipment

Class II equipment with functional earthing

Alternating current

Direct current

Pol a rity of d.c. power con nector

For indoor use only

Dangerous voltage

Caution, risk of electric shock

Energy e ciency Marking

Protecti ve earth

Ea rth

Fra me or chassis

Fu nctional earthing

Caution, hot surface

Cauti on

Operator's manual

Stand-by

"ON"/"OFF" (p ush-push)

Fu se

Fuse is used in neutral N

Caution, avoid listening at high vol ume l evels for l ong periods

Dis con nection, all power p lugs

Switch of mini-gap construction

Switch of micro- gap construction (for US version)

Switch of micro-gap / micro

disconnection construction

(for other versions except US)

Switch without contact gap (Semiconductor switching device)

RECYCLING

This product bears the selective sorting symbol for Waste

electrical and electronic equipment (WEEE). This means that

this product must be handled pursuant to European directive

2012/19/EU in order to be recycled or dismantled to minimize its

impact on the environment.

User has the choice to give his product to a competent recycling

organization or to the retailer when p2-he buys a new electrical or

electronic equipment.

This is a class B product. In a domestic environment, this product may cause radio interference, in which case

the user may be required to take adequate measures.

CE Mark Warning

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних

документів та вимогам, що передбачені чинними законодавчими актами України.

CAN ICES-3 (B)/NMB-3(B)

Industry Canada Statement

FCC compliance information statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Product Name: 10GBase-BX WDM Bi-Directional SFP+ LC Module

Model Number: SM5110LSA-10, SM5110LSB-10

Responsible party:

TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply

with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment

and the equipment is properly maintained and operated.

Issue Date: 2024/07/19

The original UK Declaration of Conformity may be found at

https://www.tp-link.com/support/ukca

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Ikke kategoriseret
Model:	Omada SM5110LSA-10

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Omada SM5110LSA-10 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret TP-Link Manualer

TP-Link Omada SM5110LSA-10 Manual

14 Juli 2025

TP-Link DeltaStream DS-P7500-16 Manual

11 Juli 2025

TP-Link UE302C Manual

5 Juli 2025

TP-Link RE1750X Manual

1 Juli 2025

TP-Link Archer TBE6500U Manual

27 Juni 2025

TP-Link RE765X Manual

26 Juni 2025

TP-Link Archer TBE3600U Manual

26 Juni 2025

TP-Link Deco BE68 Manual

26 Juni 2025

TP-Link DS-PMA-C+ Manual

26 Juni 2025

TP-Link RE405BE Manual

26 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Yamazen SSR-3048C Manual

14 Juli 2025

Yamazen SSR-2048C Manual

14 Juli 2025

Yamazen SUB-302 Manual

14 Juli 2025

Yamazen SLU-60252 Manual

14 Juli 2025

Topeak Alien II Manual

14 Juli 2025

Godox TL-C120 Manual

14 Juli 2025

Fuxtec FX-EV360 Manual

14 Juli 2025

EMeet SmartCam S800 Manual

14 Juli 2025

Yamazen SBC-30 Manual

14 Juli 2025

BlueBuilt USWM32055 Manual

14 Juli 2025