TP-Link RE235BE Manual

TP-Link Ikke kategoriseret RE235BE

Læs gratis den danske manual til TP-Link RE235BE (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 21 anmeldelser. Har du et spørgsmål om TP-Link RE235BE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

7106511692 REV1.0.0

Plug the extender into a power outlet your router. Wait until next to

its Power LED turns solid on after blinking for a while.

Note: For safety, only plug the extender in the direction as shown below.

Power On

Quick Installation Guide

Range Extender

Relocate

1. Plug in the extender about between your router and the Wi-Fi dead zone. The halfway

location you choose must be within the range of your router.

2. Wait for about 2 minutes until the LED turns solid blue relocate the . If it doesn't,

extender closer to the router to achieve better signal quality.

Enjoy!

Router Devices

Halfway

Blue: Suitable location

Red: Too far from router

Setup with videos

Scan the QR code, or visit

https://www.tp-link.com/support/setup-video/#range-extenders

and search for the setup video of your model.

* Images may differ from your actual product.

Next to

Solid On

Set Up

Method 2: Via the Tether App

1. Get the up-to-date Tether app from the Apple App

Store or Google Play, or simply scan the QR code.

2. Launch the Tether app and log in with your TP-Link

ID. If you don’t have an account, create one first.

TetherScan for Tether

3. Tap the button and select .Range Extender

Notes:

1. If you cannot find your device, please refer to > .FAQ Q1

2. Due to Tether app updates, your actual user interface

and pathway may differ from those depicted here.

My Devices

No devices found.

Choose Your Device Type

Wireless Router

Gaming Router

Range Extender

4. Follow app instructions to complete the setup.

The LED should turn solid on, indicating

successful connection to your router.

Note: If the LED does not turn solid on, please refer

to FAQ > .Q2

Method 1: Via the WPS Button

1. Activate the WPS function on your router by

pressing the WPS button.

If you don’t know how to do, refer to your router’s Note:

user manual, or you can use other methods to set it up.

The WPS button might

look like one of these:

2. Within 2 minutes, press the WPS button on the

extender for 1 second, and the LED starts

blinking. Wait for the LED, 2.4GHz LED, and

5GHz LED to turn solid blue, indicating a

successful connection.

Note: lf only the 2.4GHz or 5GHz LED is solid blue, check to

see if the router has both 2.4GHz and 5GHz turned on. If

both are turned on, try WPS again or use other methods.

3. Done. You can connect to the extender’s Wi-Fi.

Extended Network Names:

Router’s network name with at the end_EXT

Same as your EasyMesh router (see back for EasyMesh

details)

Passwords:

Same as your router

Method 3: Via a Web Browser

1. Connect your computer or smartphone to

the extender’s network TP-Link_Extender.

3. Follow web instructions to complete the setup.

2. Visit http://www.tplinkrepeater.net or

http://192.168.0.254 in a web browser.

Create a password to log in.

http://www.tplinkrepeater.net

Start

Conrm Password

Create Password

Low Middle High

TP-Link_Extender

Tip: To place the extender for optimal Wi-Fi performance, access extender settings via the

Tether app and go to find Location Assistant, or simply scan the QR code to visit

https://www.tp-link.com/support/faq/3103/.

· Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the

internet. The passwords of your extended networks are the same as your main router.

· You can also change the extender to to transform your existing wired Access Point Mode

network to a wireless one. For details, see on the back page.Access Point Mode (AP Mode)

Connect to 2.5Gbps

Ethernet Port

Router

Solid On

· You can access extender settings via the Tether app or a web browser.

LED Explanation

LED Status Indication (For Range Extender Mode)

The extender is connected or not connected to the 5 GHz

wireless network of your router.

5 GHz

On/O

The extender is connected or not connected to the 2.4 GHz

wireless network of your router.

2.4 GHz

On/O

The extender is on or o.

The system is starting up or rmware upgrade is in progress.

On/O

Blinking

The extender is connected to your router’s wireless

network and is in a suitable location.

The extender is receiving a weak signal. Try relocating it

closer to your router.

WPS connection is in progress.

No wireless connection is established.

Solid blue

Solid red

Blinking

O

(Power)

(Signal)

Access Point mode will transform your existing wired network to a wireless network.

We recommend that you use Access Point mode when your wireless devices need

to access to a wired network.

b. By Tether: Login Operation Modeto your extender → Find the

Access Point Mode (AP Mode)

a. By Web: button on top. Login Change → Find the Mode

For details, refer to the user guide at .https://www.tp-link.com/support

Note: Due to Tether app updates, images may differ from your actual user interface.

Network

Operation Mode

For more information, visit

https://www.tp-link.com/easymesh/.

You can experience strong, stable, and seamless wireless connections

throughout your home with EasyMesh, a whole home mesh standard that

works across dierent access points for ultimate exibility.

EasyMesh-Compatible

Seamless Roaming

Connects mobile devices to your routers or extenders that provide the best coverage. Devices

compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.

One-Click Settings

Press the WPS button on the main router and the extender within 2 minutes of each other,

then the EasyMesh network will set up.

Flexible Scalability

Flexibly scale your home networking with dierent vendors,* dierent topologies, dierent

Protocols and dierent product categories.

Scan for Setup Video

*TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed connections

may be due to rmware conicts of dierent vendors. The EasyMesh-Compatible function is still being developed

on some models and will be supported in subsequent software updates.

This product is compatible with standardized EasyMesh technology but has not obtained the Wi-Fi EasyMesh TM

certication.

Wi-Fi

TP-Link_Extender

CHOOSE A NETWORK...

< Settings

Q1. What should I do if the Tether app cannot nd my device during setup?

• Try another method by following the steps below:

1. Connect your smartphone to the extender’s network .TP-Link_Extender

2. Launch the Tether app, and select your extender.

3. Follow app instructions to complete the setup.

If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after completing

setup via the Tether app or web browser?

• You may have entered incorrect Wi-Fi password for your main router during the

conguration. Check the password and try again.

• Make sure the extender is close to your router, preferably within 16 feet, and away from

large electrical appliances.

• If you have enabled wireless MAC ltering, wireless access control, or access control list

(ACL) on your router, disable them rst, then follow any method on the front page to

complete the conguration.

•

Try setting it up via the WPS button.

•

Reset the extender and go through the conguration again.

If you are still having problems, contact our technical support.

For technical support, replacement services, user manuals and other

information, please visit https://www.tp-link.com/support, or simply scan the

QR code.

Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, try turning o

your cellular data.

Safety Information

• Keep the device away from water, re, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Do not use the device where wireless devices are not allowed.

• Plug the product into the wall outlets with earthing connection through the plug.

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please use this

product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

If you need more setup help, please visit

https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.

BE3600 Wi-Fi 7 Range Extender (RE235BE)

My Devices

Local Device

RExxx

XX-XX-XX-XX-XX-XX

Q3. How do I reset the extender?

•

With the extender powered on, use a pin to press the Reset button for 1 second. The

extender will reboot.

Reset

English

ATP-Link ID Change Mode Log Out

Stable wireless performance and wired connection with a main router required.

To change your extender to , do the following: Access Point Mode

Connect to 2.5Gbps

Ethernet Port

Router

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Ikke kategoriseret
Model:	RE235BE

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link RE235BE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret TP-Link Manualer

TP-Link Deco WE10800 Manual

26 August 2025

TP-Link RE2700X Manual

26 August 2025

TP-Link LS106P Manual

16 August 2025

TP-Link HB610 Manual

16 August 2025

TP-Link LS110P Manual

16 August 2025

TP-Link Omada OC400 Manual

12 August 2025

TP-Link HX510 Manual

12 August 2025

TP-Link HX220 Manual

12 August 2025

TP-Link Deco X55 Pro Manual

25 Juli 2025

TP-Link Omada SM5110LSA-10 Manual

14 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

NUX Amp Core Studio Manual

30 August 2025

Dometic TD283 Manual

30 August 2025

Laserworld PL-20 MK3 Manual

30 August 2025

Puls Dimension CP10.242 Manual

30 August 2025

Bebob S1MICRO Manual

30 August 2025

Be Quiet! Light Wings PWM 140x140x25 Manual

30 August 2025

Ventev CT-BKT-655 Manual

30 August 2025

American DJ ENCORE LP32IP Manual

30 August 2025

Thermex Caremex Hygiene Station Manual

30 August 2025

Bartscher TK60 Manual

30 August 2025