TP-Link TL-MC101 Manual


Læs gratis den danske manual til TP-Link TL-MC101 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 15 anmeldelser. Har du et spørgsmål om TP-Link TL-MC101, eller vil du spørge andre brugere om produktet?

Side 1/4
© 2024 TP-Link 7106511317 REV1.0.0
Gigabit Ethernet Media Converter
Note: It is recommended to use a TP-Link SFP module on TL-MC200, because other vendors’ modules may be incompatible.
LC-SC Fiber Cable
Package Contents: Media Converter, Power Adapter, User Guide
Scenario 1: Connect Devices with and without Optical Interfaces
Ethernet device
with optical interfaces
Media Converter Ethernet device
without optical interfaces
Gigabit Ethernet interface
Twisted-Pair Cable
Note:
1. Either two TL-MC101 converters or two TL-MC102 converters can work cooperatively. Two TL-MC200 converters with a pair of SFP module can work cooperatively.
2. One TL-MC200 can also cooperate with one TL-MC101 or one TL-MC102. However, the mode and wavelength of the SFP module used in TL-MC200 must be the same as the opposite end.
3. Connect the TX port of one converter to the RX port of the other using a ber cable.
Scenario 2: Connect Devices without Optical Interfaces
Twisted-Pair Cable Twisted-Pair Cable
Ethernet device
without optical interfaces
Media Converter Media Converter Ethernet device
without optical interfaces
Enlarge Your Ethernet Network
TL-MC101/TL-MC102/TL-MC200
Note: TL-MC102 is used as an example throughout this guide. Other models may dier in appearance.
For technical support and other information, please visit
https://www.tp-link.com/support/?type=smb, or simply scan the QR code.
Gigabit Ethernet interface Gigabit Ethernet interface
1000BASE-X interface
Fiber Cable
LED Explanation
On: Power on.
O: Power o.
PWR
On: There is a valid link for FX Port.
O: There is no valid link for FX Port.
Flashing: FX Port is transmitting or receiving data.
Link/Act
FX
On: There is a valid link for TP Port.
O: There is no valid link for TP Port.
Flashing: TP Port is transmitting or receiving data.
Link/Act
TP
Specications
IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3zStandards
PWR, FX Link/Act, TP Link/Act
For TL-MC101/TL-MC102: SC ber connector, RJ-45 jack
For TL-MC200: SFP port, RJ-45 jack
LED
Twisted-Pair
Interface
General Specifications
External Power Adapter: 9V/0.6A
Wave Length
Fiber
Power
For TL-MC101: 1310nm
For TL-MC102: 850nm
For TL-MC200: depends on the used SFP module
For TL-MC101: 9/125μm single-mode ber (≤20km)
For TL-MC102: 62.5/125μm multi-mode ber (≤220m);
50/125μm multi-mode ber (≤550m)
For TL-MC200: depends on the used SFP module
10Base-T: 2-pair UTP/STP of Cat. 3 or above (≤100m)
100Base-TX: 2-pair UTP/STP of Cat. 5 or above (≤100m)
1000Base-T: 4-pair UTP/STP of Cat. 5e or above (≤100m)
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can
injure your eyesight.
E
xplana on of the symbols on the product label
S
ymbols may vary from products The label is at the bottom of the product..
Symbol
Explanation
Cla ss II e quipment
Operation Temperature 0˚C to 50˚C (32˚F to 122˚F)
Storage Temperature -40˚C to 70˚C (-40˚F to 158˚F)
Storage Humidity 5% to 90%RH non-condensing
Operation Humidity 10% to 90%RH non-condensing
Environmental and Physical Specifications


Produkt Specifikationer

Mærke: TP-Link
Kategori: Ikke kategoriseret
Model: TL-MC101

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link TL-MC101 stil et spørgsmål nedenfor, og andre brugere vil svare dig