TP-Link TL-SX1008 Manual

TP-Link Ikke kategoriseret TL-SX1008

Læs gratis den danske manual til TP-Link TL-SX1008 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om TP-Link TL-SX1008, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation Guide

8-Port 10G Multi-Gigabit Desktop/Rackmount Switch

Power

Front Panel

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides, welcome

to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com to join TP-Link

Community.

Rear Panel

Grounding TerminalPower SocketKensington Security Slot

Feet

Bottom of the Device

Notch

Rack-mounting Bracket

Screw Rack

Method 1: Desktop Installation Method 2: Rack Installation

1 4 5 6 7 82 3

10 Gbps RJ45 Port

LEDs

Appearance

Ethernet Ports (1-8)

10G

NAS/Server

Gaming

Computer

Workstation 2.5G

Wi-Fi 6 AP

8K Video

Router

LAN PortWAN Port

Internet

AC Power Cord

Port LED

When one of the LED is on/ashing:

On: Connecting to a device but no activity.

Flashing: Transmitting or receiving data.

Left LED (10G/5G):

Green: Running at 10 Gbps.

Amber: Running at 5 Gbps.

Right LED (2.5G/1G/100M):

Green: Running at 2.5 Gbps.

Amber: Running at 100/1000 Mbps.

Power

On: Power on

O: Power o

Grounding Terminal

Kensington Security Slot

Power Socket

Secure the lock (not provided) into the security slot to prevent the device from being stolen.

The switch already comes with lightning protection mechanism. You can also ground the

switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.

Plug the female connector of the power cord directly into the power socket and plug the

male connector into an AC outlet. Make sure that the voltage of the power supply meets

the requirement of the input voltage (100–240 V ~ 50/60 Hz).

Note: The images in this guide are only for example and may not reect your actual experience.

Installation

Connection

Note:

Leave 5 to 10 cm gaps around the devices for air circulation.

Avoid placing heavy things on the device.

Place the device with its bottom facing downwards.

Mount devices in sequence from the bottom to top of the rack and ensure a certain clearance

between devices for the purpose of heat dissipation.

Transfer Method

Environmental and Physical Specications

FCC, CE, RoHS

0˚C to 50˚C (32˚F to 122˚F)

-40˚C to 70˚C (-40˚F to 158˚F)

10% to 90%RH non-condensing

5% to 90%RH non-condensing

Certication

Operating Temperature

Storage Temperature

Operating Humidity

Storage Humidity

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

Place the device with its bottom surface downward.

The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.

Use only power supplies which are provided by manufacturer and in the origin packing of this product. If you have any

questions, please don’t hesitate to contact us.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of

directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

EU Declaration of Conformity

General Specications

Specications

IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3an, IEEE 802.3bz

IEEE 802.3x, IEEE802.1p

CSMA/CD

8 100M/1G/2.5G/5G/10G RJ45 Ports

Auto-Negotiation/Auto MDI/MDIX

100BASE-TX:

2-pair UTP/STP of Cat. 5 or above (maximum 100 m)

1000BASE-T:

4-pair UTP/STP of Cat. 5e or above (maximum 100 m)

2.5GBASE-T:

4-pair UTP/STP of Cat. 5e or above (maximum 100 m)

5GBASE-T:

4-pair UTP/STP of Cat. 5e or above (maximum 100 m)

10GBASE-T:

4-pair UTP of Cat 6 (maximum 55 m) or STP of Cat 6, 6a, 7 (maximum 100 m)

32K

160 Gbps

Store-and-Forward

Automatically learning, automatically aging

QoS (802.1p/DSCP), 802.3x ow control

100Base-TX: 148810 pps/port

1000Base-TX: 1488095 pps/port

2.5GBase-TX: 3720238 pps/port

5GBase-TX: 7440476 pps/port

10GBase-TX:14880952 pps/port

Standard

Network Media (Cable)

MAC Address Table

Interface

Switching Capacity

Protocol

To avoid any device damage and bodily injury caused by improper use, you should observe the following

rules.

Keep the power o during the installation.

Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin contact and is

well grounded.

Use only the power cord provided with the switch.

Make sure that the supply voltage matches the specications indicated on the rear panel of the

switch.

Ensure that the switch is installed in a well-ventilated environment and its ventilation hole is not

blocked.

Do not open or remove the cover of the switch.

Before cleaning the device, cut o the power supply. Do not clean it by the waterish cloth, and never

use any other liquid cleaning method.

Place the device with its bottom surface downward.

Safety Precautions

Lightning Protection

Site Requirements

Temperature/Humidity

50°C

0°C

Environm ten Tempera re idittu Hum y

Ope tin 0 °C to 50 °C 10% to 90%R Non-cond sinra g H en g

S g H gtora e 0 °C to 70 °C 5% to 90%R-4 Non-cond sinen

Installation Site

Extremely high voltage currents can be produced instantly when lightning occurs and the air in the

electric discharge path can be instantly heated up to 20,000 °C. As this instant current is strong enough

to damage electronic devices, more eective lightning protection measures should be taken.

Ensure that the rack and the device are well earthed.

Make sure the power socket has a good contact with the ground.

Keep a reasonable cabling system and avoid induced lightning.

Use the signal SPD (Surge Protective Device) when wiring outdoor.

Note:

For detailed lightning protection measures, refer to the Lightning Protection Guide from the Related

Documents of our website: https://www.tp-link.com/us/conguration-guides/lightning_protection_guide.

When installing the device on a rack or a at workbench, attach much importance to the following items:

The rack or workbench is at, stable, and sturdy enough to support the weight of 5.5 kg at least.

The rack or workbench has a good ventilation system. The equipment room is well ventilated.

The rack is well grounded. Keep the device less than 1.5 meters away from the power socket.

Electronic elements including capacitance and inductance on the device can be aected by external

interferences, such as conducted emission by capacitance coupling, inductance coupling, and

impedance coupling. To decrease the interferences, make sure to take the following measures:

Use the power supply that can eectively lter interference from the power grid.

Keep the device far from high-frequency and strong-current devices such as radio transmitting

station.

Use electromagnetic shielding when necessary.

Electromagnetic Interference

The dust accumulated on the switch can be absorbed by static electricity and result in poor contact of

metal contact points. Some measures have been taken for the device to prevent static electricity, but

too strong static electricity can cause deadly damage to the electronic elements on the internal circuit

board. To avoid the eect of static electricity on the operation of the switch, attach much importance to

the following items:

Dust the device regularly, and keep the indoor air clean.

Keep the device well grounded and ensure that the static electricity has been transferred.

Keep the equipment room at an appropriate level of temperature and humidity. Too much or too little

humidity may lead to bad insulation, leakage of electricity, mechanical property changes, and corrosion.

High temperatures may accelerate aging of the insulation materials, signicantly shortening the service

life of the device. To nd out the best temperature and humidity conditions for the device, check the

following table.

Clearness

Advanced Feature

Frame Forwarding Rate

MAC Address Learning

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Ikke kategoriseret
Model:	TL-SX1008
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	294 mm
Dybde:	180 mm
Højde:	44 mm
Produktfarve:	Sort
Pakkevægt:	2070 g
Pakkedybde:	400 mm
Pakkebredde:	250 mm
Pakkehøjde:	80 mm
Formfaktor:	1U
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 90 %
Driftstemperatur (T-T):	0 - 50 °C
Hurtig start guide:	Ja
Kabler inkluderet:	Vekselstrøm
Pakketype:	Kasse
Strømkilde:	Vekselstrøm
Certificering:	CE, FCC ,RoHS
Strømforbrug (maks.):	28.4 W
Netværksstandarder:	IEEE 802.3,IEEE 802.3ab,IEEE 802.3an,IEEE 802.3bz,IEEE 802.3p,IEEE 802.3x
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Indgangsstrøm:	0.8 A
Strøm over Ethernet (PoE):	Ingen
Switch-type:	Ikke administreret
10G understøttelse:	Ja
Auto MDI/MDI-X:	Ja
Basis omskiftning RJ-45 Ethernet porte, antal:	8
Basis omskiftning RJ-45 Ethernet porttype:	10G Ethernet (100/1000/10000)
Opbevar-og-frem:	Ja
MAC adresselabel:	32000 entries
Switch kapacitet:	160 Gbit/sek.
Jumbo Frames support:	Ja
Jumbo rammer:	10000
Stativ-montering:	Ja
Antal blæsere:	1 blæser(e)
Strømforsyning inkluderet:	Ja
Auto-forhandling:	Ja
Pakke bufferlager:	16 MB
Hastighed for videresendelse:	119 Mpps
Rack monteringskit:	Ja
Antal 10G Ethernet-porte (kobber):	8