Tripp Lite PDU3V20D354A Manual

Tripp Lite Strømskinne PDU3V20D354A

Læs gratis den danske manual til Tripp Lite PDU3V20D354A (68 sider) i kategorien Strømskinne. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Tripp Lite PDU3V20D354A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/68

1. Important Safety 2

Instructions

2. Installation 3

2.1 Mounting the ATS 3

2.2 Mounting the Power Strip 4

2.3 Connecting the Power Strip 4

to the ATS

2.4 Connecting the ATS 5

2.5 Networking the ATS 5

3. Features 6

4. Digital Display 8

5. Using the Digital Display 11

5.1 Navigating Display Menus 11

and Submenus

5.2 Navigating Conﬁg Menus 18

and Submenus

6 20. Conﬁguration and Operation

6.1 Automatic Transfer Switch 20

7. Service 22

8. Warranty and Product 22

Registration

Español 24

Français 47

Owner’s Manual

PDU330AT6L15, PDU330AT6L21

(Series Number: AG-00D5)

3-Phase 1U Monitored Rack PDU

with Automatic Transfer Switch (ATS)

PDU3VD351

(Series Number: AG-00C2)

PDU3V20D354, PDU3V20D354A, PDU3V20D354B

(Series Number: AG-013C)

3-Phase Vertical Power Strip

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $50 value!

www.tripplite.com/warranty

15-05-226-933363.indb 1 6/29/2015 9:07:59 AM

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be

followed during the installation, operation, and storage of this product.

Failure to heed these instructions and warnings may affect the

product warranty.

• The Power Strip provides the convenience of multiple outlets, but DOES NOT provide surge or

line noise protection for connected equipment.

• Do not exceed the following equipment ratings:

• Maximum full balanced load is 13.9A per bank when powered by a 3Φ ATS (Automatic

Transfer Switch) with a rated input of 24A.

• Maximum full balanced load is 20A per bank when powered by a 3Φ ATS (Automatic Transfer

Switch) with a rated input of 35A.

• The Automatic Transfer Switch and Power Strip are designed for indoor use only, in a controlled

environment, away from excess moisture, temperature extremes, conductive contaminants, dust

or direct sunlight.

• Keep indoor ambient temperature between 32°F and 104°F (0°C and 40°C).

• The Automatic Transfer Switch and Power Strip must be installed by a qualified technician only.

• Do not attempt to mount the Automatic Transfer Switch or Power Strip to an insecure or

unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the Automatic Transfer Switch to an outlet that is in accordance with your local building

codes and that is adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the Automatic Transfer Switch to an ungrounded outlet or to extension cords or

adapters that eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the Power Strip should not draw more current than the

individual outlet’s rating.

• The total load connected to the Power Strip must not exceed the maximum load rating for the

Automatic Transfer Switch.

• Do not attempt to modify the Automatic Transfer Switch’s or Power Strip’s input plugs or power

cables.

• Do not drill into or attempt to open any part of the Automatic Transfer Switch or Power Strip

housing. There are no user-serviceable parts inside.

• Do not attempt to use the Automatic Transfer Switch or Power Strip if any part of it becomes

damaged.

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to significantly affect its safety

or effectiveness is not recommended. Do not use this equipment in the presence of a

flammable anesthetic mixture with air, oxygen or nitrous oxide.

1. Important Safety Instructions

15-05-226-933363.indb 2 6/29/2015 9:07:59 AM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	Strømskinne
Model:	PDU3V20D354A

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite PDU3V20D354A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Strømskinne Tripp Lite Manualer

Tripp Lite PDU3EVN10l1530B Manual

7 September 2024

Tripp Lite NSU-G24 Manual

30 August 2024

Tripp Lite PDU3VN6H50B Manual

14 August 2024

Tripp Lite PDU3EVS6L2130 Manual

10 August 2024

Tripp Lite PDU3V20D354A Manual

9 August 2024

Tripp Lite NSU-G24C2P08 Manual

8 August 2024

Tripp Lite PDUMH30HV Manual

5 August 2024

Tripp Lite PDU360AT6G60 Manual

3 August 2024

Tripp Lite PDU3EVN6G60B Manual

3 August 2024

Tripp Lite PDU3EVN6L1530B Manual

2 August 2024

Strømskinne Manualer

Nyeste Strømskinne Manualer

Philips SPN7080BA Manual

10 Marts 2025

Philips SPN5085B Manual

9 Marts 2025

Qian QEI-1000-01 Manual

27 Februar 2025

Act AC2425 Manual

21 Februar 2025

Act AC2415 Manual

20 Februar 2025

Act AC2420 Manual

20 Februar 2025

Sven SF-08E-16 Manual

31 December 2025

Brennenstuhl Estilo Manual

29 December 2024

Vivanco EPLS 6ALU Manual

7 December 2024

Vivanco EPLS 4USB_ALU Manual

7 December 2024