Triton FetHead Broadcast Manual

Triton Ikke kategoriseret FetHead Broadcast

Læs gratis den danske manual til Triton FetHead Broadcast (26 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 84 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 42.5 anmeldelser. Har du et spørgsmål om Triton FetHead Broadcast, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/26
FetHead Broadcast
Philosophy
FetHead Broadcast -is an in line microphone preamplifier specially designed for operating in challenging live
environments. FetHead Broadcast offers 23dB of low noise high quality amplification which can be applied
to either dynamic or condenser microphones as phantom power transferred to the microphone. is
Recommended application
In broadcast or live performance situations, a microphone signal often travels through long cables before
reaching the mixing desk. When small microphone signals travel adjacent to power lines or dimmed light
cables, audible signal interference is likely to be induced into the microphone cable. Fethead Broadcast
amplifies the microphone signal before the cable and greatly improves the signal to noise ratio offering a
much higher quality signal to the mixing desk. A low impedance output buffer enables output drive to long
cables (up to 3000 meters). Another advantage is that the FetHead Broadcast does not need main supplies
or batteries.
Operation
Connect your microphone on the input XLR of your Fethead Broadcast. At the opposite side an XLR cable
runs from your Fethead Broadcast to the mixer/preamp. it’s ready for use with any type of phantom
powered setup. Fethead Broadcast uses phantom power to power its circuitry, but also provides enough
phantom power to power the connected microphone.
Circuit topology
FetHead Broadcast utilizes a low noise FET amplifier circuit, which reveals every detail, followed by a low
impedance output buffer which reveals every detail with pinpoint accuracy and offers high-end sound
quality.
Features
• Low noise Class A FET amplifier
• Low impedance output buffer
• 23 dB amplification
• Rugged enclosure with balanced XLR input/output
• internal rumble filter
• frequency response 40Hz-100 kHz (+/- 1dB)
• Z- in 680 Ω
• Circuit is powered with 48V phantom power
Dimensions
height: 1,22” / 31mm
width: 1” / 26mm
length: 3,11” / 79mm
weight: 80 g
Registration
Thank you for purchasing a Triton Audio Fethead Broadcast. To register your product please go to:
www.tritonaudio.com/support#registration

Produkt Specifikationer

Mærke: Triton
Kategori: Ikke kategoriseret
Model: FetHead Broadcast

Har du brug for hjælp?

Hvis du har brug for hjælp til Triton FetHead Broadcast stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Triton Manualer

Triton

Triton Display Manual

7 December 2024
Triton

Triton AirHead Manual

6 December 2024
Triton

Triton D2O Plugin Manual

5 September 2024
Triton

Triton D2O Stereo Manual

29 Juli 2024
Triton

Triton D2O Mono Manual

29 Juli 2024
Triton

Triton FetHead Broadcast Manual

29 Juli 2024
Triton

Triton FetHead Filter Manual

29 Juli 2024
Triton

Triton BigAmp Manual

29 Juli 2024
Triton

Triton BigAmp Piëzo Manual

29 Juli 2024
Triton

Triton FetHead Germanium Manual

29 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

MuxLab

MuxLab 500439 Manual

5 November 2025
GVM

GVM BL160-II Manual

5 November 2025
Uniprodo

Uniprodo UNI_ROLL_03 2in1 Manual

5 November 2025
Rockville

Rockville SS6 Manual

5 November 2025
Silk'n

Silk'n VacuPedi FTC04 Manual

5 November 2025
MEPROLIGHT

MEPROLIGHT MCO PRO Manual

5 November 2025
XPG

XPG Battlecruiser II Manual

5 November 2025
Hosa

Hosa USQ-110 Manual

5 November 2025
JMAZ

JMAZ Centipede Quadro Manual

5 November 2025
Lake People

Lake People Mic-Amp F311-D Manual

5 November 2025