Trotec PSCS 10‑3,6V Manual

Trotec Skruemaskine PSCS 10‑3,6V

Læs gratis den danske manual til Trotec PSCS 10‑3,6V (16 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Trotec PSCS 10‑3,6V, eller vil du spørge andre brugere om produktet?

Side 1/16
TRT-BA-TRT-BA-PSCS10-3,6V-TC-001-EN
PSCS 10-3,6V
EN
OPERATING MANUAL
CORDLESS BATON
SCREWDRIVER
1 EN
Operating manual – cordless baton screwdriver PSCS 10-3,6V
table of contents
Notes regarding the operating manual.................................1
Safety .....................................................................................2
Information about the device................................................6
Transport and storage...........................................................8
Start-up..................................................................................9
Operation .............................................................................11
Available accessories..........................................................13
Errors and faults..................................................................13
Maintenance ........................................................................14
Disposal ...............................................................................14
Notes regarding the operating manual
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Warning of explosive substances
This symbol indicates dangers to the life and health of
persons due to potentially explosive substances.
Warning!
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution!
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Note
This signal word indicates important information (e.g.
material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Follow the manual
Information marked with this symbol indicates that the
operating manual must be observed.
Wear safety glasses
Information marked with this symbol indicates that you
should wear eye protection.
Wear a protective mask
Information marked with this symbol indicates that you
should wear a protective mask.
Wear Ear Protection
Information marked with this symbol indicates that you
should wear hearing protection.
The current version of the operating manual can be found at:
PSCS 10-3,6V
http://download.trotec.com/?sku=4410000005&id=1
Legal notice
This release replaces all previous versions. No part of this
publication may be reproduced without written permission from
TrotecGmbH&Co.KG. The same applies for electronically
processing, duplicating or spreading the publication. Subject to
technical changes. All rights reserved. Trademarks are used
without guarantee that they may be used freely and primarily
following the spelling of the manufacturer. Product names are
registered.
Changes to construction in the interests of constant
improvements to the product, as well as changes to the shape
and colour are reserved.
The scope of delivery may vary from product images. This
document was created with all due care. TrotecGmbH&Co.KG
accepts no liability whatsoever for possible mistakes or
omissions.
© TrotecGmbH&Co.KG


Produkt Specifikationer

Mærke: Trotec
Kategori: Skruemaskine
Model: PSCS 10‑3,6V
Bredde: 120 mm
Dybde: 150 mm
Højde: 40 mm
Vægt: 380 g
Produktfarve: Black, Yellow
Opladningstid: 3 t
Batterispænding: 3.6 V
Batterikapacitet: 1.5 At
Indbygget lys: Ja
Borepatron type: Magnetisk bitholder
Batteriteknologi: Lithium-Ion (Li-Ion)
Indikator for batteriniveau: Ja
Strømkilde: Batteri
Tomgang (maks.): 200 rpm
Soft greb: Ja
Antal understøttede batterier: 1
Bæretaske: Ja
Vibrationsudledning: 0.216 m/s²
Omvendt: Ja
Maksimal torsion: 4 Nm
Torsion indstillinger: 7
Bore diameter, stål (maks.): 4 mm
Bore diameter, træ (maks.): 6 mm
Antal gear: 1
Skrue diameter (maks.): - mm
Borebit inkluderet: Ja
Antal bits: 26 stk
Bit-sæt holder: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Trotec PSCS 10‑3,6V stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skruemaskine Trotec Manualer

Trotec

Trotec PSCS 11-3,6V Manual

15 November 2022

Skruemaskine Manualer

Nyeste Skruemaskine Manualer