Troy-Bilt Bronco CRT 208cc 14 Manual

Troy-Bilt Ikke kategoriseret Bronco CRT 208cc 14

Læs gratis den danske manual til Troy-Bilt Bronco CRT 208cc 14 (56 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Troy-Bilt Bronco CRT 208cc 14, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/56
Safe Operation Practices • Set-Up • Operation • Service And Maintenance • Troubleshooting • Replacement Parts
OperatOr’s Manual
Form No. 769-26507
(May 31, 2022)
179 cc, 208 cc, 243 cc and 272 cc
OHV Horizontal Shaft Engines
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are
applicable to all models and the model depicted may differ from yours.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate.
Failure to comply with these instructions may result in personal injury - SAVE THESE INSTRUCTIONS.
WARNING
CALIFORNIA PROPOSITION 65
Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals
known to State of California to cause cancer and birth defects or other reproductive harm.
Record Product Information
Before setting up and operating your new
engine, please locate the model plate and
record the information in the provided area to
the right. This information will be necessary,
should you seek technical support via our web
site, Customer Support Department, or with a
local authorized service dealer.
Model Number
Serial Number
English ......................................................................................................................................Page 2
Spanish (Español) ....................................................................................................................Page 20
French (Français) ......................................................................................................................Page 38
Replacement Parts ..................................................................................................................Page 19
2
SAFE OPERATION PRACTICES
TRAINING
1. Read, understand and follow all warnings and instructions on
the engine and the equipment, and in the operator’s manuals
before attempting to install and/or operate. Keep this manual
in a safe place for future and regular reference and for
ordering replacement parts.
2. Be familiar with all controls and their proper operation. Know
how to stop the engine and disengage them quickly.
3. Never allow children under 14 years of age to operate the
equipment. Children 14 and over should read and understand
the warnings and instructions both on the product and in the
manuals and be trained and supervised by an adult.
4. Never allow adults to operate the equipment without proper
instruction.
5. Keep the area of operation clear of all persons, particularly
small children and pets. Stop the engine if anyone enters
the area.
PREPARATION
1. Wear sturdy, rough-soled work shoes and close fitting slacks
and shirts. Loose fitting clothes or jewelry can be caught in
the moving parts. Never operate the equipment in bare feet
or sandals.
2. Disengage all powered clutch and drive control levers on the
equipment before starting the engine.
3. Never leave the engine running while unattended.
4. Never attempt to make any adjustments while the engine
is running, except where specifically recommended in the
operator’s manual(s).
SAFE HANDLING OF GASOLINE:
To avoid personal injury or property damage, use extreme care
in handling gasoline. Gasoline is extremely flammable and the
vapors are explosive. Serious personal injury can occur when
gasoline is spilled on yourself and/or your clothes which can
ignite. Wash your skin and change clothes immediately.
1. When adding fuel, turn engine OFF and let engine cool at
least 5 minutes before removing the fuel cap.
2. Fill fuel tank outdoors or in well ventilated area.
3. Use only an approved fuel container.
4. Never fill containers inside a vehicle or on a truck or trailer
bed with a plastic liner. Always place containers on the
ground away from your vehicle before filling.
5. If possible, remove equipment from the truck or trailer and
refuel it on the ground. If this is not possible, then refuel
equipment on a trailer with a portable container, rather than
from a fuel pump dispenser nozzle.
6. Keep the nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete. Do
not use a nozzle lock-open device.
7. Do not overfill fuel tank. Fill tank to full as indicated by the
fuel level indicator installed inside the fuel tank to allow
space for fuel expansion. On some models, a fuel level
indicator may NOT be present, in this instance, fill the tank
no more than 1/2 inch below the bottom of the filler neck to
allow space for fuel expansion.
8. Replace fuel cap and tighten securely.
9. If fuel is spilled, wipe it off the engine and the equipment.
Move equipment to another area and wait 5 minutes before
starting the engine.
10. To reduce fire hazards, keep the engine and equipment free
of grass , leaves or other debris build up. Clean up oil or fuel
spillage and remove any fuel-soaked debris.
11. Keep fuel away from sparks, open flames, pilot lights, heat,
and other ignition sources.
WARNING
This symbol points out important safety instructions which, if not followed, could endanger the personal
safety and/or property of yourself and others. Read and follow all instructions in this manual before
attempting to operate. Failure to comply with these instructions may result in personal injury. When you see
this symbol, HEED ITS WARNING!
DANGER
This engine was built to be operated according to the safe operation practices in this manual. As with any type of power
equipment, carelessness or error on the part of the operator can result in serious injury. Failure to observe the following
safety instructions could result in serious injury or death.

Produkt Specifikationer

Mærke: Troy-Bilt
Kategori: Ikke kategoriseret
Model: Bronco CRT 208cc 14

Har du brug for hjælp?

Hvis du har brug for hjælp til Troy-Bilt Bronco CRT 208cc 14 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Troy-Bilt Manualer

Troy-Bilt

Troy-Bilt Super Bronco CRT 16" 208cc XP Manual

16 Juli 2025
Troy-Bilt

Troy-Bilt Mustang Z42E XP Manual

14 Juli 2025
Troy-Bilt

Troy-Bilt Bronco CRT 208cc 14 Manual

11 Februar 2025
Troy-Bilt

Troy-Bilt TBC304 Manual

29 August 2024
Troy-Bilt

Troy-Bilt Big Red Manual

29 August 2024
Troy-Bilt

Troy-Bilt Bronco 42I Manual

29 August 2024
Troy-Bilt

Troy-Bilt TB30E XP Manual

29 August 2024
Troy-Bilt

Troy-Bilt Super Bronco 46 XP FAB Manual

29 August 2024
Troy-Bilt

Troy-Bilt Super Bronco CRT Manual

29 August 2024
Troy-Bilt

Troy-Bilt Super Bronco 46K FAB XP Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AXIL

AXIL AN0268G5 Manual

16 Juli 2025
CYP

CYP EL-21PIP Manual

16 Juli 2025
Rockville

Rockville MAC360W Manual

16 Juli 2025
Zeiss

Zeiss Conquest V4 4-16x44 Manual

16 Juli 2025
DS18

DS18 MRX300D Manual

16 Juli 2025
Daewoo

Daewoo DJNS08S Manual

16 Juli 2025
DS18

DS18 SLG-FKP6LD Manual

16 Juli 2025
Märklin

Märklin 72211 Manual

16 Juli 2025
Rockville

Rockville RockZR Manual

16 Juli 2025
ENDORFY

ENDORFY Broadcast Low Profile Boom Arm Manual

16 Juli 2025