Troy-Bilt Storm 2600 Manual

Troy-Bilt Sneslynge Storm 2600

Læs gratis den danske manual til Troy-Bilt Storm 2600 (96 sider) i kategorien Sneslynge. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Troy-Bilt Storm 2600, eller vil du spørge andre brugere om produktet?

Side 1/96
Safe Operation Practices • Assembly • Operation • Service And Maintenance
Form No. 769-26467
(May 31, 2022)
OperatOrs anual M
Snow Blower
2-STAGE AND 3-STAGE (500, 600 & 800 SERIES)
English ...........................................................................................................................Page 2
Spanish (Español) ......................................................................................................... Page 32
French (Français) .......................................................................................................... Page 65
Model Number
Serial Number
Record Product Information
Before setting up and operating your new snowblower,
please locate the model plate on the engine and record
the information in the provided area to the right. You
can locate the model plate by standing at the operators
position and looking at the rear, right side of the engine.
This information will be necessary, should you seek
technical support via our web site, Customer Support
Department, or with a local authorized service dealer.
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine.
Failure to comply with these instructions may result in personal injury - SAVE THESE INSTRUCTIONS.
WARNING
CALIFORNIA PROPOSITION 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of
California to cause cancer and birth defects or other reproductive harm.
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are
applicable to all models and the model depicted may differ from yours.
2
SAFE OPERATION PRACTICES
Training
1. Read, understand, and follow all instructions on the machine
and in the manual(s) before attempting to assemble and
operate. Keep this manual in a safe place for future and
regular reference and for ordering replacement parts.
2. Be familiar with all controls and their proper operation. Know
how to stop the machine and disengage them quickly.
3. Never allow children under 14 years of age to operate this
machine. Children 14 and over should read and understand
the instructions and safe operation practices in this manual
and on the machine and be trained and supervised by an
adult.
4. Never allow adults to operate this machine without proper
instruction.
5. Thrown objects can cause serious personal injury. Plan your
snow-blowing pattern to avoid discharge of material toward
roads, bystanders and the like.
6. Keep bystanders, pets and children at least 75 feet from the
machine while it is in operation. Stop machine if anyone
enters the area.
7. Exercise caution to avoid slipping or falling, especially when
operating in reverse.
Preparation
Thoroughly inspect the area where the equipment is to be used.
Remove all doormats, newspapers, sleds, boards, wires and other
foreign objects, which could be tripped over or thrown by the
machine.
1. Always wear safety glasses or eye shields during operation
and while performing an adjustment or repair to protect your
eyes. Thrown objects which ricochet can cause serious injury
to the eyes.
2. Do not operate without wearing adequate winter outer
garments. Do not wear jewelry, long scarves or other loose
clothing, which could become entangled in moving parts.
Wear footwear which will improve footing on slippery
surfaces.
3. Use a grounded three-wire extension cord and receptacle for
all machines with electric start engines.
4. Adjust auger housing height to clear gravel or crushed rock
surfaces.
5. Disengage all control levers before starting the engine.
6. Never attempt to make any adjustments while engine is
running, except where specifically recommended in the
operator’s manual.
7. Let engine and machine adjust to outdoor temperature
before starting to clear snow.
WARNING
This symbol points out important safety instructions which, if not followed, could endanger the personal
safety and/or property of yourself and others. Read and follow all instructions in this manual before
attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
When you see this symbol, HEED ITS WARNING!
DANGER
This machine was built to be operated according to the safe operation practices in this manual. As with any type of
power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of
amputating fingers, hands, toes and feet and throwing debris. Failure to observe the following safety instructions could
result in serious injury or death.


Produkt Specifikationer

Mærke: Troy-Bilt
Kategori: Sneslynge
Model: Storm 2600

Har du brug for hjælp?

Hvis du har brug for hjælp til Troy-Bilt Storm 2600 stil et spørgsmål nedenfor, og andre brugere vil svare dig