Amplification des basses et
EQ Presets | Présets d'égalisation
Press (1s) = Power On/Off
Press = Superhuman Hearing
Maintenez 1 seconde pour allumer/éteindre
Appuyer pour activer/désactiver la technologie Superhuman Hearing
The Stealth 600 Headset and Transmitter come paired out of the box. When paired, with both the
Le casque Stealth 600 et le transmetteur devraient avoir ete jumeles lorsque vous achetez le produit.
Stealth 600 Wireless Transmitter
Transmetteur sans fil Stealth 600
Press = Cycle EQ Audio Presets
Press and Hold = Virtual Surround
Pr gali ationé ésets d’ s
Appuyer pour parcourir les presets
Maintenez pour activer/désactiver
The Stealth 600 uses a rechargeable battery. Make sure to charge it regularly.
Always charge your headset before storing it for any extended period of time
(greater than 3 months). Never store the unit in temperatures above 113°F/45°C.
Le Stealth 600 dispose d'une batterie rechargeable. Assurez-vous de la
Chargez toujours votre casque avant de le ranger pour une longue durée
(plus de 3 mois). Ne stockez jamais le casque à des températures supérieures à 45°C.
Firmware Update and Customization
Mise à jour du micrologiciel et personnalisation
Important: Update before using
Important : procédez à la mise à jour
avant d'utiliser le produit
turtlebeach.co /audiohubm
Connect to the Ear Force Audio Hub for Windows or Mac to update
firmware and customize your sound further.
Connectez-vous au Ear Force Audio Hub pour PC ou Mac afin de mettre
le micrologiciel à jour et personnaliser votre audio.
Any questions? Des questions?
turtlebeach.com/audiohub | turtlebeach.com/support
To Access the Rating Label:
1. Remove the ear pad, start by pulling theleft
ear pad straight up using your thumb.
To replace the ear pad, follow the same process in reverse.
Pour remettre le coussinet en place, veuillez suivre la procédure inverse.
2. Once you've released the cloth from the lip on top, pull the
ear pad straight back and it should slip right off.
1. Retirez le coussinet en commençant pargauche
le tirer vers le haut à l'aide de votre pouce.
2. Une fois le haut du tissu dégagé, il vous suffit de tirer le coussinet
vers vous pour le retirer facilement.
EMC: EN 55032: 2012, CISPR 32: 2015
EN 301 489-1 V2.1.1 (2017-02), EN 301 489-17 V3.1.1 (2016-11)
EN 61000-4-2:2009, EN 61000-4-3: 2006 + A1:2008 + A2:2010, EN 61000-4-8: 2010
The products are licensed, as required, for additional country specific standards for the international Marketplace.
Additional issued licenses available upon request.
Radio: EN 300 328 V2.1.1 (2016-11)
Environmental: RoHS 2011/65/EU, WEEE 2012/19/EU, REACH 2006/1907/EC
Packaging 94/62/EC, Battery 2006/66/EC, Toys Safety Directive 2009/48/EC
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user is
required to take appropriate measures.
Dieses ist ein Gerät der Funkstörgrenzwertklasse B. In Wohnbereichen können bei Betrieb dieses Gerätes
Rundfunkstörungen auftreten, in welchen Fällen der Benutzer für entsprechende Gegenmaßnahmen verantwortlich ist.
Ceci est un produit de Classe B. Dans un environnement domestique, ce produit risque de créer des interférences
radioélectriques, il appartiendra alors à l’utilisateur de prendre les mesures spécifiques appropriées.
Turtle Beach Europe Ltd is obligated as a producer with a main activity of selling under The Producer Responsibility Obligations
(Packaging Waste) Regulations 2007. To fulfil our obligation we are registered with Comply Direct and their Recycling Room. Here you
will find advice and information on packaging waste management, recycling symbols and the waste hierarchy principles of reduce,
https //www.complydirect.co the-recycling-roo: m/ m/
Please visit the following URL for a complete copy of the Declaration of Conformity: http://www.turtlebeach.com/homologation
Regulatory Compliance Statements for the EAR FORCE Stealth 600P RX & TX
Federal Communications Commission (FCC) Compliance Notices
This section includes the following FCC statements for the EAR FORCE Stealth 600P RX & TX:
• FCC ID: XGB-TB3340 (RX) & XGB-TB3341 (TX) • Non-Modification Statement
• Class B Interference Statement • RF Radiation Exposure & Hazard Warning
Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. The limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment doesn’t cause harmful interference to radio or television reception, which can
be diminished by turning the equipment off and on, the user is encouraged lo try to correct the interference by one or more of the
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: [1] This device may not
cause harmful interference, and (2) thls devlce must accept any interference received, Including interference that may cause
RF Radiation Exposure & Hazard Statements
To ensure compliance with FCC RF exposure requirement, this device must be installed in a location such that the antenna of the
device will be greater than 2 cm (0.8 in.] from all persons. Using higher gain antennas and types of antennas not covered under the
FCC certification of this product is not allowed. lnstallers or the radio and and users of the product must adhere to the installation
instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any other antenna or
Non-Modification Statement
Use only the supplied Internal antenna. Unauthorized anlennas, modifications, or attachments could damage the EAR FORCE
Stealth 600P RX & TX Models and violate FCC regulations. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment. Please contact Turtle Beach for a list of
approved 2.4 GHz antennas.
This product is compliant with the Consumer Product Safety Improvement Act of 2008, Public Law 110-314 (CPSIA)
Canadian ICES Statements IC: 3B79A-TB3340 (RX) and IC: 38791A-T83341 (TX)
This device complies with ICES-003 and RSS-247 of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any Interference, Including interference that may cause undesired operations of the device.
Ce dispositif est conforme aux normes NMB003 et CNR-247 d’Industrie Canada
Son fonctionnement est soumis aux deux conditions suivantes :
1. Ce dispositif ne doit pas causer d’interférences nuisibles et;
2. Il doit pouvoir accepter les interférences, incluant celles pouvant nuire à son fonctionnement normal.
To prevent radio Interference to the licensed service (I.e. co-channel Mobile Satellite systems) this device is Intended to be operated
indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna] that is installed outdoors is
subject to licensing and not supported by EAR FORCE Stealth 600P RX & TX Models.
Pour éviter les interferences radio au service agréé (c.-à-d. Les systèmes par satellite mobile co-canal), cet appareil est destiné à
fonctionner à l’intérieur et a l’extérieur des fenêtres pour assurer un blindage maximal. L’équipement (ou son antenne d’émission)
installé à l’extérieur est soumis à l’octroi de licences et n’est pas pris en charge par les modèles EAR FORCE 600P RX et TX.
RF Radiation Exposure & Hazard Statement
To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location such that the antenna of the
device will be greater than 2 cm (0.8 in.) away from all persons. Using higher gain antennas and types of antennas not covered under
the IC certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the installation
instructions provided in this manual. This transmitter must not be co-located or operated in conjunction wilh any other antenna or
Exposition aux radiations RF & Mention de danger
Pour assurer la conformité avec les exigences RSS-102 d'exposition aux RF (Radio Fréquences), cet appareil doit être installé dans un
endroit ou l’antenne de l'appareil sera situé à une distance de plus de 2 cm (0,8 po.) de toutes personnes. L’utilisation d’antennes de
gain plus élevé et les types d'antennes qui ne sont pas couvertes en vertu de la certification d’IC de ce produit n'est pee autorisée. Les
installateurs de la radio et les utilisateurs du produit final doivent se conformer aux Instructions d’installation fournies dans ce
manuel. Cet émetteur ne dolt pas Aire co-implanté ou exploité en conjonction avec toute autre antenne ou tramemetteur.
European Union and European Fair Trade Association Regulatory Compliance
This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair
Trade Association. These countries, listed below, are referred to as The European Community throughout this document: AUSTRIA,
BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY,
IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA,
SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWlTZERLAND.
Unión Europea y Asociación Europea de Comercio Justo Cumplimiento Normativo
Cet équipement peut être utilisé dans les pays qui composent les pays membres de l'Union européenne et l'Association européenne
du commerce équitable. Ces pays, énumérés ci-dessous, sont désignés comme la Communauté européenne tout au long de ce
document : AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY,
GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA,
SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWlTZERLAND.
Declaration of Conformity
Indicates compliance with the Essential Requirements of the Radio Equipment Directive (RED) of the European Union (2014/53/EU).
This equipment meets the following conformance standards:
EN 60950-1: A11:2009+A1:2010+A12:2014 (T-Mark License), IEC 60950:2005 (2nd Ed.)+ Am1: 2009 + Am 2: 2013 (CB Scheme
Certificate), EN 50332-1: 2013,
EN 50332-2: 2013, EN 71-3: 2013
Additional licenses issued for specific countries are available on request.
This symbol on the product or its packaging indicates that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it
is recycled in a manner that protects human health and the environment. For more information about where you can
drop off your waste for recycling, please contact your local authority, or where you purchased your product.
