Ubiquiti Networks NanoSwitch N-SW Manual


Læs gratis den danske manual til Ubiquiti Networks NanoSwitch N-SW (20 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Ubiquiti Networks NanoSwitch N-SW, eller vil du spørge andre brugere om produktet?

Side 1/20
Outdoor 4-Port PoE
Passthrough Switch
Model: N-SW
Introduction
Thank you for purchasing the Ubiquiti Networks®
NanoSwitch
. This Quick Start Guide is designed to guide you
through installation and also includes warranty terms.
Package Contents
Passthrough Switch
Model: N-SW
NanoSwitch
Self-Tapping
Screw
Metal Straps
(Qty. 2)
Quick Start
Guide
Installation Requirements
Mounting accessories and drain wire are not included.
Pole-Mounting
Drill with a 4.5 mm Drill Bit
7 mm Socket Wrench or Screwdriver
Wall-Mounting
(2) Screws (≤ 5 mm Screw Head)
(1) Drain Wire, Optional (≤ 16 AWG, ≤ 40 cm)
Cables
Shielded Category 5 (or above) cabling with drain wire
should be used for all wired Ethernet connections and
should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial-grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit
www.ubnt.com/toughcable


Produkt Specifikationer

Mærke: Ubiquiti Networks
Kategori: Netværkskort/adapter
Model: NanoSwitch N-SW

Har du brug for hjælp?

Hvis du har brug for hjælp til Ubiquiti Networks NanoSwitch N-SW stil et spørgsmål nedenfor, og andre brugere vil svare dig