Uniden EXI8560 Manual

Uniden Telefon EXI8560

Læs gratis den danske manual til Uniden EXI8560 (12 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Uniden EXI8560, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

At Uniden, we'll take care of you!

Thank you for purchasing a Uniden product.

If you have any questions or problems,

please do not return this product to the place of purchase.

Having Trouble?

Our customer care specialists are here to help you! Visit our website at

www.uniden.com or call our Customer Hotline at 1-800-297-1023

during regular business hours.*

Need a Part?

To order headsets, replacement batteries or other accessories, visit our

website at www.uniden.com 1-800-554-3988 or call during regular

business hours.*

Help for our Special

Needs Customers

Uniden provides a customer service hotline for accessibility questions. If

you have disability and need customer service assistance or if you have any

questions about how Uniden's products can accommodate persons with

disabilities, please call the accessibility voice/TTY line:

1-800-874-9314 (voice or TTY).

Accessibility information can be found on our website, www.uniden.com,

under the "Accessibility" link. If your call is received outside of our business

hours, leave us a message and we will call you back.

* Central Standard Time. Detailed customer service hours are available at www.uniden.com.

Printed in China UCZZ01064BZ(0)

UNIDEN

CORDLESS

TELEPHONES

EXI8560 Series

1) Installing the Phone

1-1. Choosing the Best Location

To get the best performance out of your new phone, put it in the best location:

Near an AC outlet

and a telephone

wall jack.

• Microwave ovens

• Refrigerators

• Fluorescent

lighting

• Dust

• Excessive

moisture

• Other cordless

telephones

In a

centrally-located

open area.

PLACE YOUR BASE

• TVs

• Other electronics

• Direct sunlight

• Extreme temperatures

• Personal computers

• Wireless LAN

equipment

• Dust

• Excessive

moisture

• Areas with

a lot of

background

noise

• Shock

• Vibration

• Shock

• Vibration

TRY TO AVOID

Notes: For maximum range

Keep both the base and handset antennas free of obstruction.

When the handset is not in use, place the handset in an upright position.

Metal and reinforced concrete may aect cordless telephone performance.

•

1-2. Plug in the Battery

Use only the Uniden BT-905 rechargeable battery pack supplied with your phone.

1Locate the battery pack,

battery cover and the handset. 2Line up the red and black wires

on the battery pack connector

with the sticker in the handset's

battery compartment.

3Place the cover over the

battery compartment and

slide it up into place.

Push the battery connector in firmly.

(You should hear it click into place.)

Red

Black

1Locate the battery pack,

battery cover and the handset. 2Line up the red and black wires

on the battery pack connector

with the sticker in the handset's

battery compartment.

3Place the cover over the

battery compartment and

slide it up into place.

Push the battery connector in firmly.

(You should hear it click into place.)

Red

Black

1-3. Plug in the Base

Don’t put any power cord where people might trip over it or step on it. If a power cord becomes

chafed or worn out, it can create a re or electrical hazard.

Note: For optimum battery life, charge your handset completely before you connect the telephone

cord. The rst time you charge a new battery, allow 15 to 20 hours.

4Connect the AC adapter to the jack.DC IN 9V

Route the cord through the molded wiring channel.

Connect the AC adapter

to a standard 120V

AC wall outlet.

DO NOT use an AC outlet

controlled by a wall switch.

To AC outlet

AC adapter

(supplied)

To DC IN 9V

4Connect the AC adapter to the jack.DC IN 9V

Route the cord through the molded wiring channel.

Connect the AC adapter

to a standard 120V

AC wall outlet.

DO NOT use an AC outlet

controlled by a wall switch.

To AC outlet

AC adapter

(supplied)

To DC IN 9V

7Place the handset in the base.

What if the charge LED doesn't

light up?

• Check AC adapter connection.

• Make sure you are not using

an outlet that's controlled by

a wall switch.

Make sure that

the LED /in use

illuminates.