Manual No. PT9417 Illustrated Parts List for
FS1
00 Series Machines
Fifth
Edition
Copyright
1994
By
Union
Special
Corporation
Rights
Reserved
In
All
Countries
Printed
in U.S.A.
October
1994
PREFACE
This
parts
manual
has
been
prepared
to
assist
you
in
locating
individual
parts
or
assemblies
on
FS100
Series
machines.
it
can
bP.
used
in
conjunction
with
Union
Special
Adjusting
Manual
IN9302.
lt
Is
the
desire
of
Union
Special
that
each
machine
run
at
its
optimum
performance.
Parts
listed
in
this
manual
are
designed
specifically
for
your
machine
and
are
manufactured
with
utmost
precision
to
assure
long
lasting
service.
This
manual
has
been
comprised
on
the
basis
of
available
information.
Changes
in
design
and/or
improvements
may
incorporate
a
slight
modification
of
configuration
in
illustrations
or
part
numbers.
On
the
following
pages
are
illustrations
and
terminology
used
in
describing
the
parts
used
on
FS100
Series
machines.
INSTRUCTIONS
SAFETY
RULES
The sewing machines described in this instruction manual are prohibited from being put
into
service until
it
has been
ascertained that the sewing
units,
in which these sewing machines
will
be
built-in
have conformed with the
EC
Council
Directives
(89/392/EEC,
Annex
11
B).
1. Before putting the machines described
in
this manual into service, carefully read the instructions. The
starting
of
each machine is
only
permitted aftertaking notice
of
the instructions and
by
qualified operators.
IMPORTANT! Before putting the machine into service, also read the safety rules and instruction from the motor supplier.
2.
Observe the national safety rules valid
for
your
country.
3.
Each machine is only allowed to
be
used as foreseen. The foreseen use
oflhe
particular machine is described in paragraph
"STYLES OF MACHINES"
of
this
instruction
manual. Another use, going beyond the description, is
not
as foreseen.
4.
All safety devices must
be
in position when the machine is ready
for
work
or
in operation. Operation
of
the machine without
the appertaining safety devices is prohibited.
5.
Wear
safety
glasses.
6.
In
case
of
machine conversions
and
changes
all
valid
safety
rules
must
be
considered. Conversions
and
changes
are
made
at
your
own risk.
7.
The warning
hints
in the
instructions
are marked with one
of
these two
symbols:
2
