Union Special M312A Manual


Læs gratis den danske manual til Union Special M312A (1 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Union Special M312A, eller vil du spørge andre brugere om produktet?

Side 1/1
M312G
M312A
Union Special GmbH
Raiffeisenstraße 3
03-2000 en
UNION SPECIAL CARPET STRIP CUTTING MACHINE M312G
FOR CARPET BORDER EDGING
The machine has a
rotating carrier
for 3 cutting blade drive shafts. Each drive shaft is
equipped with 4 revolving cutting blades. The machine comes factory adjusted with a di-
stance of the blades on each of the drive shafts of 60, 70 and 80 mm (different dimensi-
ons on request). The lower shaft has clearance cuts for the knives which are spaced 5
mm apart.
Equipped with a maintenance free motor 230/400V / 3 ph / 50 c/s, 0.37 kW. Safety
switch if Plexiglas cover is opened. Foot switch, control lamp indicating "ready for operati-
on".
Dimensions: approx. 900 x 400 x 400 mm. Weight: 79 kg.
Advantages:
Change of cutting width within each of the 3 knife drive shafts without any tools.
Knife drive shafts can be easily removed for re-sharpening or for changing the dimen-
sions between the blades for different cutting width.
Cutting blades made out of high quality steel, dia 102 mm. Increase of knife life due to
cutting without a counter shear blade. Suitable for all known carpet types.
High cutting productivity of up to 26 m/min (depending on carpet material).
Start/Stop by foot switch.
Two pull-out support arms, approx. 400 mm long, allow easier handling of wider carpet
pieces.
Cutting Machine M312A
Same as M312G, but single phase motor 230V / 50 c/s, 0.37 kW.


Produkt Specifikationer

Mærke: Union Special
Kategori: Symaskine
Model: M312A

Har du brug for hjælp?

Hvis du har brug for hjælp til Union Special M312A stil et spørgsmål nedenfor, og andre brugere vil svare dig