,
..
,-,
MarH)al
No. PT95b8
Illustrated
Parts
list
f~;
the
SP;lOO
Top
Feed;series
Machines
First
Edition·
Copyri~hi
]995
By
Union
Spe<:iol
Corporation
Rights
Re$ei'Ved
In
All
CountrieS·
Printed
in
Jopon
April1995
PREFACE
;I-
This
parts manual has been ·prepared to assist you
in
locating individual ports
or
assemblies on the SP100
Top
Feed Series
machines.
lt
con
be used
in
conjunction
with
l:Jnion
Special
Adjus,ting
monuai1N9509. ·
lt is the desire of
Union
Special that each machine ·run
·at
fts
optimUm
•performance~
Parts listed
in
this nianual
are
designed
specifically
for
your
machine
and
ore
manufactured with uhnost precision to
assure
l.ong lasting service.
,_
\."
- .
This
manual has been compiled
on
the basis
of
available infonnotion. Changes
in
design
and/or
imp-roV_ements
may lead to slight_
differences in the illustrations
or
part numbers.
Illustrations and terminology used
in
describing the parts.'uied on the
SPlOO
Top
Feed
Series machines
will
be
found
in
the
following
pages. . -
");.
SAFETY
RULES
1. Before
puHing
the machines described
in
this
mOnuol
into service, carefully read the instructions. The starting of
each
machine
is
only
permiHed
alter taking
notice
of
the
instructions; and only by quali6ed operators.
IMPORTANT!
Before
pulling the machine
into
service, also read
the
safety
rules
ond
instructions
from
the
motor supplier.
2. Observe
the
national safety rules applied
in
your counhy.
3.
11
is
strictly prohibited to put the sewing machines described
in
this instruction manual into service
until
it
has been confirmed
that the sewing
units
into
which
they
will
be installed are
in
conformance
with
the
EC
Council
Directives
(89/392/EEC, Annex
11
Bj.
The
use of each- machine
is
only permiHed
in
the intended and anticipated manner.
The
intended and anticipated use
of
particular machines
is
described
in
paragraph
"STYLES
OF
MACHINES"
of this instruction manual. Other usesr going beyond
the description,
are
not deemed
as
intended.
4.
All
safety devices must be
in
position when the machine
is
ready for work
or
in
operation. Operation of the machine without
the
appertaining safety
devices
is prohibited.
5. Wear sofety
glasses.
6.
When making conversions
and
changes
to
the machines, all valid safety rules must
be
considered_
Conv~rsions
and changes
are
made
at
your own risk.
7.
The
warning
-hints
in
the instructions
are
marked with one of these symbols.
