VänEE 1601708 Manual

VänEE Klimaanlæg 1601708

Læs gratis den danske manual til VänEE 1601708 (18 sider) i kategorien Klimaanlæg. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om VänEE 1601708, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

20503 REV. 12

USER AND INSTALLER MANUAL

RESIDENTIAL USE ONLY

HRV CONSTRUCTO 1.5ES 46110

HRV CONSTRUCTO 2.0ES 47110

HRV SOLO 1.5ES 46720

HRV SOLO 2.0ES 47720

HRV NOVOFIT 1.5ES 46121

HRV NOVOFIT 2.0ES 47121

100H 1601706

200H 1601708

NOVO+ 100H 1601717

NOVO+ 200H 1601719

R EAD AND SAVE THESE INSTRUCTIONS

Please take note that this manual uses the following symbols to emphasize particular information:

Identifies an instruction which, if not followed, might cause serious personal injuries including possibility of death.

CAUTION

Denotes an instruction which, if not followed, may severely damage the unit and/or its components.

NOTE: Indicates supplementary information needed to fully complete an instruction.

LIMITATION

For residential (domestic) installation only. Installation work and electrical wiring must be done by a qualified person in accordance with all

applicable codes and standards, including fire-rated construction codes and standards.

⚠ WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSON(S) OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer.

2. Before servicing or cleaning this unit, disconnect power cord from electrical outlet.

3. This unit is not designed to provide combustion and/or dilution air for fuel-burning appliances.

4. When cutting or drilling into a wall or ceiling, do not damage electrical wiring and other hidden utilities.

5. Do not use this unit with any solid-state speed control device other than those specified in section 7.2.

6. This unit must be grounded. The power supply cord has a 3-prong grounding plug for your personal safety. It must be plugged into a

mating 3-prong grounding receptacle, grounded in accordance with the national electrical code and local codes and ordinances. Do

not remove the ground prong. Do not use an extension cord.

7. Do not install in a cooking area or connect directly to any appliances.

8. Do not use to exhaust hazardous or explosive materials and vapors.

9. When performing installation, servicing or cleaning this unit, it is recommended to wear safety glasses and gloves.

10. When applicable local regulation comprises more restrictive installation and/or certification requirements, the aforementioned

requirements prevail on those of this document and the installer agrees to conform to these at his own expense.

11. Due to the weight of the unit, two installers are recommended to perform installation.

CAUTION

1. To avoid prematurely clogged filters, turn the unit OFF during construction or renovation.

2. Please read specification label on product for further information and requirements.

3. Be sure to duct air outside – Do not intake/exhaust air into spaces within walls or ceiling or into attics, crawl spaces, or garage. Do

not attempt to recover the exhaust air from a dryer or a range hood.

4. Intended for residential installation only in accordance with the requirements of NFPA 90B (for a unit installed in U.S.A.) or Part 9 of

the National Building Code of Canada (for a unit installed in Canada).

5. Do not run any air ducts directly above or within 2 ft (0.61 m) of a furnace or its supply plenum, boiler, or other heat producing

appliance. If a duct has to be connected to the furnace return plenum, it must be connected 10’ (3.1 m) away from plenum’s

connection to the furnace.

6. The ductwork is intended to be installed in compliance with all applicable local and national codes.

7. When leaving the house for a long period of time (more than two weeks), a responsible person should regularly check if the unit

operates adequately.

8. If the ductwork passes through an unconditioned space (e.g.: attic), the unit must operate continuously except when performing

maintenance and/or repair. Also, the ambient temperature of the house should never drop below 18°C (65°F).

9. At least once a year, the unit mechanical and electronic parts should be inspected by qualified service personnel.

10. Do not use your unit during construction or renovation of your house or when sanding drywall. Certain types of dust and vapors may

damage your system.

11. Make sure at all times that the outside intake and exhaust hoods are free from any snow during the winter season. It is important to

check your unit during a big snow storm, so it doesn’t draw in any snow. If this is the case, please turn the unit OFF for a few hours.

12. Since the electronic control system of the unit uses a microprocessor, it may not operate correctly because of external noise or very

short power failure. If this happens, unplug the unit and wait approximately 10 seconds. Then, plug the unit in again.

⚠ WARNING

Produkt Specifikationer

Mærke:	VänEE
Kategori:	Klimaanlæg
Model:	1601708

Har du brug for hjælp?

Hvis du har brug for hjælp til VänEE 1601708 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Klimaanlæg VänEE Manualer

VänEE 44262 Manual

19 September 2024

VänEE V210E75RS Manual

19 September 2024

VänEE V210E75RT Manual

19 September 2024

19 September 2024

19 September 2024

19 September 2024

19 September 2024

VänEE V130H65RT Manual

19 September 2024

VänEE V130E65RT Manual

19 September 2024

VänEE V160H75RT Manual

19 September 2024

Klimaanlæg Manualer

Nyeste Klimaanlæg Manualer

KwiKool KIB3021-2 Manual

15 Juni 2025

LG KNSAL181A Manual

15 Juni 2025

KwiKool KPO12-43H Manual

15 Juni 2025

KwiKool KPO12-23H Manual

14 Juni 2025

LG KNSAL241A Manual

14 Juni 2025

MRCOOL DIY-MULTI3-27HP230C Manual

14 Juni 2025

LG LP1025WSSM Manual

14 Juni 2025

Airrex HSC-18P Manual

14 Juni 2025

MRCOOL MDUCC15048060 Manual

14 Juni 2025

LG KNSAL151A Manual

14 Juni 2025