Vaxcel Alto C0287 Manual

Vaxcel Lys Alto C0287

Læs gratis den danske manual til Vaxcel Alto C0287 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vaxcel Alto C0287, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0287
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Cross Bar (A)
Mounting Screw (B)
Wire Connector (C)
Removal Sucker (D)
Removal Sucker (D)
GU10 LED Bulb
Max. 6.5W X 4 (E)
GU10 LED Max. 6.5W (E)
(included)
Swivel
Light Head
Canopy
Outlet Box
Set Screw
Mounting Screw (B)
Wire Connector (C)
Cross Bar (A)
Green Ground Screw
1. Attach the cross bar (A) to the outlet box by using two mounting screws (B).
2. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections by using the wire
connectors (C) as follows:
---Connect the black (hot) wire from the fixture to the black (hot) wire from the power source.
---Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power source.
---Attach the fixture ground wire to the cross bar (A) with the green ground screw, then connect it to
the house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
Turn off the power at fuse or circuit box
Installation Steps
Page 1 / 2
230213


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Lys
Model: Alto C0287

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Alto C0287 stil et spørgsmål nedenfor, og andre brugere vil svare dig