Vaxcel T0616 Manual

Vaxcel Ikke kategoriseret T0616

Læs gratis den danske manual til Vaxcel T0616 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel T0616, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Page 1 / 3

220126

Important to Know:

1. If you are not familiar with state and local electrical

codes, it is recommended that you consult with a

qualified electrician.

2. This fixture requires a 120 VAC, 60 Hz power

source.

3. For general safety and to avoid any possible

damage to the sensor, be sure the power is

switched "off" before adjustment.

Maximum Wattage: 24 W

Working Temperature Range: -13°F ~ 113°F

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0616 / T0617

Features:

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Note: Fixture can be wall mounted or eave mounted.

Wall Mounted

Eave Mounted

1. Energy saving LED fixture.

Sensor

Backplate

Light Fixture

Fixture Mounting Screw

Decorative cover

Tools Needed:

1. Phillips-head screwdriver for attaching mounting screws to

mounting strap, mounting bracket and fixture to mounting bracket.

2. 1/8” wide flat-head screwdriver for connecting the source wires

into the wiring terminal station on the mounting bracket.

(1) Philip-head Screwdriver

(2) 1/8" wide Flat-head Screwdriver

Photocell automatically keeps the light OFF during

daylight hours and automatically turns the light ON

during evening hours.

The light will DIM to low level brightness

automatically after 6 hours of evening illumination

The wall switch that the light is connected to can be

used to manually override and change functionality

and settings of certain modes.

Mounting

Strap

Outlet Box

Mounting Screw

Mounting Bracket

FRONT

Terminal

Station

L GND N

Mounting Bracket

Hole

Mounting Screw

Fixture Mounting

Screw Hole

Hardware Package (included):

Mounting Screw X2

#8/32X1/2 in

Fixture Mounting Screw

Mounting Strap

Mounting Screw X2

#6/32 X1/2 in

Mounting Screw X2

#10/24 X1/4 in

Decorative cover

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Ikke kategoriseret
Model:	T0616

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel T0616 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vaxcel Manualer

Vaxcel T0616 Manual

27 December 2025

Vaxcel OW37081 Manual

25 December 2025

Vaxcel T0253 Manual

25 December 2025

Vaxcel T0588 Manual

25 December 2025

Vaxcel OW38773 Manual

24 December 2025

24 December 2025

24 December 2025

24 December 2025

24 December 2025

24 December 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tineco Floor One S7 Artist Manual

27 December 2025

Tunturi Cardio Fit T60 Manual

27 December 2025

Boompods BOOMCARD Manual

27 December 2025

Akasa Newton A-NUC35-M1B Manual

27 December 2025

Yamazen SUT-152 Manual

27 December 2025

Victorinox Expedition Lite Manual

27 December 2025

SereneLife SLTWF15LED Manual

27 December 2025

Valberg VAL-TR150 Manual

27 December 2025

TriStar KA-5210 Manual

27 December 2025

Yamazen RTPS-1515 Manual

27 December 2025