Velleman WS805 Manual


Læs gratis den danske manual til Velleman WS805 (11 sider) i kategorien Vejrstation. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Velleman WS805, eller vil du spørge andre brugere om produktet?

Side 1/11
WS805 VELLEMAN 1
WS805 -- MULTIFUNCTIONAL TIME/WEATHER STATION
1. Introduction
Thank you for buying the WS805. This state-of-the-art time/weather station provides the user with a time read-out and a
weather forecast for the next 12 to 24 hours. The device is also equipped with weather icons and provides instant read-
outs of both indoor/outdoor temperatures and relative humidity. The WS805 is also equipped with a snooze alarm and a
calendar.
2. Batteries
Remove the cover of the battery compartment at the back of the device and insert 2 AA-batteries of 1.5VDC. Mind the
polarity indications on the inside of the battery compartment !
3. Setting the Correct Date and Time
Hold the MODE button for two seconds to make the digits for the 12h/24h-mode flash. Use the "+" or "-" button to
select 12h- or 24h-mode for the time display and confirm your choice with the MODE button. The digits will change
more rapidly if the button in question is held.
The digits for the hours start to flash. Enter the hours with "+" or "-" and confirm with MODE.
The digits for the minutes start to flash. Enter the minutes with "+" or "-" and confirm with MODE.
The digits for the year start to flash. Enter the year with "+" or "-" and confirm with MODE.
The digits for the month start to flash. Enter the month with "+" or "-" and confirm with MODE.
The digits for the day start to flash. Enter the day with "+" or "-" and confirm with MODE.
The digits for the time zone start to flash. Set the time zone with "+" or "-" (from -12h to +12h), confirm with MODE.
Note that the day of the week is adjusted automatically.
4. Using the Alarm and the Snooze Alarm
Hold the ALARM button for 2 seconds to activate the alarm setting mode and to make the digits for the hours flash. Wait ±
5 seconds until the device returns to the normal display mode if you simply wish to view the current alarm time. If you want
to set a new alarm time, you should press "+" or "-" to enter the hours before the device returns to the normal display
mode. Press ALARM to confirm the hours. The digits for the minutes start to flash. Enter the minutes with "+" or "-" and
confirm with ALARM. The device automatically returns to the normal display mode and the "!"-symbol is displayed.
Press "+" when the device is in the normal display mode to select one of three alarm ON/OFF modes : ALARM ON
("!"-symbol is displayed), ALARM ON with SNOOZE (the "!"- and " "-symbols are displayed) or ALARM OFF
(neither symbol is displayed).
ALARM ON : The "!"-symbol appears on the display when the alarm is set, the symbol flashes
while the alarm is sounding and it disappears when the alarm is deactivated.
ALARM ON with SNOOZE : Both the "!"- and the " "-symbol appear on the display when the alarm is set with
snooze and the "!"-symbol flashes while the alarm is sounding. Press the
LIGHT/SNOOZE button to trigger a snooze alarm with an 8-minute activation interval
(the " "-symbol flashes during the interval). Press any other button to deactivate
the alarm for 24 hours.
ALARM OFF : Both the alarm and the snooze function are deactivated.
WS805 VELLEMAN 2
5. Temperature/Humidity Read-Out
Press MODE when the device is in the normal display mode to display room temperature ("TEMP IN"), outside
temperature ("TEMP OUT"), relative humidity ("HUMIDITY") or the exact time in that order.
If the temperature is displayed in the normal display mode :
- press "-" to select either °C or °F.
- press the MAX/MIN button to display the max. inside or outside temperature for 5 seconds and press again to
display the min. inside or outside temperature.
- press the CLEAR button to clear the memory for min. and max. indoor/outdoor temperature.
Remark : The message "
Lo
" is displayed as "outside temperature" if the outdoor sensor is not connected.
6. Weather Forecast
If you want a more precise weather forecast for the next 12 to 24 hours, you will have to select the correct weather
situation from the list below. Consequently, the device will warn you if any weather changes are to be expected. You
can select one of the following weather conditions :
Select the current weather situation as follows : Hold the "-" button for two seconds in the normal display mode until
the weather icon on the display starts to flash. Select the various weather patterns with the " " button in the order +
mentioned above : sunny - slightly cloudy - cloudy - rainy- stormy. Press "-" again to confirm your choice. The device
automatically returns to the normal display mode.
" Storm Alarm
When the WS805 detects an approaching storm, the icons for rainy and cloudy weather will flash continuously. The
backlight will be lit for 5 seconds and the alarm will sound for 10 seconds (this procedure is repeated three times).
Press an arbitrary button to deactivate the alarm.
" Pressure Trend
: the weather is stable
: weather conditions are improving
: weather conditions are worsening
SUNNY
SLIGHTLY
CLOUDY CLOUDY RAINY STORMY


Produkt Specifikationer

Mærke: Velleman
Kategori: Vejrstation
Model: WS805

Har du brug for hjælp?

Hvis du har brug for hjælp til Velleman WS805 stil et spørgsmål nedenfor, og andre brugere vil svare dig