Vestil ACP-1824-9-HDL Manual

Vestil Ikke kategoriseret ACP-1824-9-HDL

Læs gratis den danske manual til Vestil ACP-1824-9-HDL (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vestil ACP-1824-9-HDL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

rev. 2/1/2017

ACP

ALUMINUM

CHANNEL

DOLLY

NSTRUCTION

ANUAL

Receiving instructions:

After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the

packaging and maintains the orientation of the product in the packaging; then inspect the product closely

to determine whether it sustained damage during transport. If damage is discovered during the

inspection, immediately record a complete description of the damage on the bill of lading. If the

product is undamaged, discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where

the product is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a)

the instructions in this manual; or b) information provided on labels affixed to the product.

Neither is Vestil

responsible for any consequential damages sustained as a result of failing to exercise sound judgment

while assembling, installing, using or maintaining this product.

ESTIL

ANUFACTURING

ORP

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com e-mail: sales@vestil.com

Table of Contents

Hazard identification: explanation of signal words……………………………………………………………………. 2

Safety Guidelines…………………………………………………………………………..………………………….….2

Exploded parts diagrams and bills of materials………..……………………………………………………………...3-5

Label placement diagram …………..

…………………………………………………………...................................6

Limited warranty…………………………………………………………………………………………………………..7

rev. 2/1/2017

HAZARD IDENTIFICATION: explanation of signal words

This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable

seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to

uses of the product likely cause property damage.

The signal words used appear below along with the meaning of each word:

Identifies a hazardous situation which, if not avoided, WILL result in DEATH or

SERIOUS INJURY. Use of this signal word is limited to the most extreme

situations.

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or

SERIOUS INJURY.

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or

MODERATE injury.

Identifies practices likely to result in product/property damage, such as operation that

might damage the product.

Each person who assembles, installs, uses, or maintains this product should read the entire manual and fully

understand the directions in advance. If after reading the manual you do not understand an instruction, ask

your supervisor or employer for clarification, because failure to adhere to the directions in this manual

might result in serious personal injury.

SAFETY GUIDELINES

Vestil diligently strives to identify foreseeable hazards associated with the use of its products. However, material

handling is inherently dangerous and no manual can address every conceivable risk. The end-user ultimately is

responsible for exercising sound judgment at all times.

Electrocution might result if any part of the product contacts electrified wires. Reduce the likelihood of

electrocution by applying common sense:

 DO NOT contact electrified wires with any part of this device, your body, or clothing.

 DO NOT use or store the product where contact with electrified wires is likely.

 Always inspect the usage area before using the product & implement precautions that account for conditions.

If this product is used improperly or carelessly, the operator and/or bystanders might sustain serious

personal injuries or even be killed. To reduce the likelihood of injury:

• Failure to read and understand the entire manual before assembling, installing, using or servicing the

product is a misuse of the product.

• Read the manual to refresh your understanding of proper use and maintenance procedures.

• DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so and certain that it

will be safe to use afterwards.

• DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized

modifications automatically void the Limited Warranty and might make the product unsafe to use.

• DO NOT exceed the maximum rated load (see Label 287 on product).

• Inspect the product before each use.

A. DO NOT use this product if the inspection reveals structural damage. Examples of structural damage include,

but are not limited to, the following: 1) Cracked, broken or significantly deformed load-bearing members; 2)

cracked welds; 3) missing or deformed safety chain/strap; 3) corrosion, severe wear, or other condition that

affects the ability of the product to support weight or itself. Replace each part that fails to pass an inspection,

and DO NOT use the product until it is fully restored to normal condition.

B. DO NOT use the product if any unusual noise or movement is observed. If a malfunction occurs, remove the unit

from service and notify your supervisor & maintenance personnel about the issue.

• DO NOT use this device UNLESS all product labels (see “Label Placement Diagram”) are readable and undamaged.

Proper use, maintenance, and storage are essential for this product to function properly.

o Always use this product in accordance with the instructions in this manual and consistent with any training relevant

to machines, devices, etc. used in conjunction with this product.

o Keep the product clean & dry. Lubricate moving parts.

o FOR HYDRAULIC UNITS: Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, use an anti-

wear hydraulic oil with a viscosity grade of 150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron transmission fluid.

o Contact the manufacturer for MSDS information

Produkt Specifikationer

Mærke:	Vestil
Kategori:	Ikke kategoriseret
Model:	ACP-1824-9-HDL

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil ACP-1824-9-HDL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vestil Manualer

Vestil FMDL-850 Manual

7 Oktober 2025

Vestil EHLT-TL-48144-2-46 Manual

7 Oktober 2025

Vestil DRUM-LRT-DC Manual

7 Oktober 2025

Vestil ACP-1824-9-HDL Manual

7 Oktober 2025

Vestil CYL-LT-1-PN Manual

7 Oktober 2025

Vestil CRL-4-12-3000 Manual

7 Oktober 2025

Vestil L-270-DC-HD-SS Manual

7 Oktober 2025

Vestil DRUM-LRT-DC-II Manual

7 Oktober 2025

Vestil TDT-50-MD Manual

7 Oktober 2025

Vestil SNM-62-FA Manual

7 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vollrath 36358 Manual

7 Oktober 2025

Vollrath INC-80S18 Manual

7 Oktober 2025

Lofrans LFR200 Manual

7 Oktober 2025

Lofrans T500 Manual

7 Oktober 2025

Martin Audio Wavefront W8LC Manual

7 Oktober 2025

Metra 99-5865CH Manual

7 Oktober 2025

Panduit CD-525 Manual

7 Oktober 2025

NEO Tools 11-751 Manual

7 Oktober 2025

CineTreak CAP20SH Manual

7 Oktober 2025

Skil RT1323-00 Manual

7 Oktober 2025