Vestil AHTD-3648 Manual

Vestil Ikke kategoriseret AHTD-3648

Læs gratis den danske manual til Vestil AHTD-3648 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Vestil AHTD-3648, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
04/04/2025
AHTD,BTA,TAS,TS
V
ESTIL MFG. CO. 1
VESTIL MANUFACTURING COMPANY
2999 N. Wayne St., Angola, IN 46703
Ph: 260-665-7586 · Fax: 260-665-1339
E-mail: sales@vestil.com · Website: www.vestil.com
MODEL DOCK BOARDS
Serial number ____________
Operation Instructions ……………………….……… 2
Routine Maintenance ………………..…………….… 2
Safety Label Identification ………………………... 3
Warranty …………………………………….….….. 3
IMPORTANT NOTES, WARNINGS AND SAFETY INSTRUCTIONS
Ensure that all employees understand and follow the following.
Failure to read and understand this owner’s manual before using or
servicing the DOCK BOARD constitutes a misuse of the product. All
persons who will install, use, or care for this product must be familiar
with this material.
o Ensure that all information / safety / warning labels stay in place and
remain legible.
o Do not use the DOCK BOARD if any damage or unusual noise is observed.
Do not perform any modifications to the DOCK BOARD without the
manufacturer’s approval. Failure to receive authorization for changes to
the equipment could void the warranty.
Maintenance and repairs are to be done only by personnel qualified to
perform the required work. Consideration will not be given for warranty
repair charges without prior written authorization by the manufacturer.
WHEN ORDERING
REPLACEMENT PARTS:
We take pride in using quality
parts on the equipment we
manufacture. We are not
responsible for equipment
problems resulting from the use
of unapproved replacement
parts.
To order replacement or
spare parts for this equipment,
contact the factory.
In any communication with
the factory please be prepared
to provide the machine’s serial
number, which is indicated on
the machine dataplate.
RECEIVING INSTRUCTIONS
It is possible that this product
could incur damage during
transit.
Inspect the unit closely when
it arrives. If you see evidence
of damage or rough handling to
either the packaging or to the
product when it is being
unloaded, immediately make a
note of it on the Bill Of Lading!
It is important that you
remove the product’s packaging
upon its arrival to ensure that
there is no concealed damage
or to enable a timely claim with
the carrier for freight damage.
Also verify that the product
and its specifications are as
ordered.
OWNER’S
M
ANUAL
04/04/2025
AHTD,BTA,TAS,TS
V
ESTIL MFG. CO. 2
O
PERATION INSTRUCTIONS – DOCK BOARDS______
o Ensure that all employees involved in the operation of this DOCK BOARD understand and follow these instructions!
Warning: Do not exceed the DOCK BOARD’s load ratings. Injury to personnel or permanent damage to the DOCK BOARD
could result from exceeding the listed capacity.
Operation:
Inspect the DOCK BOARD legs and curbs (if applicable) daily.
Warning: Keep all personnel clear of the DOCK BOARD when unit is being put into & removed from the dock.
Use a fork lift place the unit into position. The DOCK BOARD MUST BE supported by a minimum 4” surface on each
side of the Dock Board.
Caution: Nev
er use the DOCK BOARD if any damage is observed OR if it is in need of repairs. Notify your supervisor or
maintenance personnel if you notice anything out of the ordinary.
Ensure that all information/safety/warning labels stay in place and are legible. Refer to the labels page in this
manual.
R
OUTINE MAINTENANCE & SAFETY CHECKS – DOCK BOARDS
o Warning: Care should be taken to identify all potential hazards and comply with applicable safety procedures
before beginning work.
(A) Inspect daily for:
1.) Damage or structural deformation to the structural members including but not limited to Dock Board legs,
curbs and main deck plate.
(B) Inspect monthly for:
1.) All the information/safety/warning labels being in place and in good condition.
SAFETY LABEL IDENTIFICATION
4” 4”

Produkt Specifikationer

Mærke: Vestil
Kategori: Ikke kategoriseret
Model: AHTD-3648

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil AHTD-3648 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Vestil Manualer

Vestil

Vestil AHTD-3648 Manual

7 Oktober 2025
Vestil

Vestil APG-P8-L Manual

7 Oktober 2025
Vestil

Vestil ATP-C-3048 Manual

7 Oktober 2025
Vestil

Vestil AHLT-4872-3-43 Manual

7 Oktober 2025
Vestil

Vestil ALL-T-D8W-1400 Manual

7 Oktober 2025
Vestil

Vestil APG-P6-L Manual

7 Oktober 2025
Vestil

Vestil AHLT-4048-3-43 Manual

7 Oktober 2025
Vestil

Vestil ABLT-H-4-32 Manual

7 Oktober 2025
Vestil

Vestil AF-3060 Manual

7 Oktober 2025
Vestil

Vestil APG-M-38 Manual

7 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Turbo Air

Turbo Air LED081BE Manual

7 Oktober 2025
Metra

Metra 95-6559B Manual

7 Oktober 2025
Audison

Audison Forza F2O Manual

7 Oktober 2025
Axxess

Axxess AXPIO-HD2 Manual

7 Oktober 2025
Heritage Audio

Heritage Audio Grandchild 670 Manual

7 Oktober 2025
Axxess

Axxess AXUSB-TY4 Manual

7 Oktober 2025
Lofrans

Lofrans Thetis 7003 Manual

7 Oktober 2025
Axxess

Axxess AX-TYAMP2-SWC Manual

7 Oktober 2025
Liberty Pumps

Liberty Pumps ALM-2W Manual

7 Oktober 2025
Axxess

Axxess AXDI-SP1 Manual

7 Oktober 2025