Vestil AIR-2000 Manual

Vestil Ikke kategoriseret AIR-2000

Læs gratis den danske manual til Vestil AIR-2000 (9 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vestil AIR-2000, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/9
rev. 2/10/2016 Product manual, operation instructions.doc
Copyright 2013 Vestil Manufacturing Corp. Page 1 of 9
AIR-2000
I
NSTRUCTION MANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely
to determine whether it sustained damage during transport. If damage is discovered during the
inspection, immediately record a complete description of the damage on the bill of lading. If the
product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a)
the instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil
responsible for any consequential damages sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.
VESTIL MANUFACTURING CORP.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: sales@vestil.com
Table of Contents
Hazard identification: explanation of signal words……………………………………………………………………. 2
Safety Guidelines…………………………………………………………………………..………………………….….2
Exploded parts diagrams and bills of materials………..……………………………………………………………...3-7
Label placement diagram …………..
…………………………………………………………...................................8
Limited warranty………………………………………………………………………………………………………….9
rev. 2/10/2016 Product manual, operation instructions.doc
Copyright 2013 Vestil Manufacturing Corp. Page 2 of 9
HAZARD IDENTIFICATION: explanation of signal words
This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable
seriousness of those injuries, if the product is misused in the ways described. Other signal words call attention to
uses of the product likely cause property damage.
The signal words used appear below along with the meaning of each word:
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that
might damage the product.
Each person who assembles, installs, uses, or maintains this product should read the entire manual and fully
understand the directions in advance. If after reading the manual you do not understand an instruction, ask
your supervisor or employer for clarification, because failure to adhere to the directions in this manual
might result in serious personal injury.
SAFETY GUIDELINES
Vestil diligently strives to identify foreseeable hazards associated with the use of its products. However, material
handling is inherently dangerous and no manual can address every conceivable risk. The end-user ultimately is
responsible for exercising sound judgment at all times.
Electrocution might result if any part of the product contacts electrified wires. Reduce the likelihood of
electrocution by applying common sense:
DO NOT contact electrified wires with any part of this device, your body, or clothing.
DO NOT use or store the product where contact with electrified wires is likely.
Always inspect the usage area before using the product & implement precautions that account for conditions.
If this product is used improperly or carelessly, the operator and/or bystanders might sustain serious
personal injuries or even be killed. To reduce the likelihood of injury:
Failure to read and understand the entire manual before assembling, installing, using or servicing the
product is a misuse of the product.
Read the manual to refresh your understanding of proper use and maintenance procedures.
DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so and certain that it
will be safe to use afterwards.
DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized
modifications automatically void the Limited Warranty and might make the product unsafe to use.
DO NOT exceed the maximum rated load (see Label 287 on product).
Inspect the product before each use.
A. DO NOT use this product if the inspection reveals structural damage. Examples of structural damage include,
but are not limited to, the following: 1) Cracked, broken or significantly deformed load-bearing members; 2)
cracked welds; 3) missing or deformed safety chain/strap; 3) corrosion, severe wear, or other condition that
affects the ability of the product to support weight or itself. Replace each part that fails to pass an inspection,
and DO NOT use the product until it is fully restored to normal condition.
B. DO NOT use the product if any unusual noise or movement is observed. If a malfunction occurs, remove the unit
from service and notify your supervisor & maintenance personnel about the issue.
DO NOT use this device UNLESS all product labels (see “Label Placement Diagram”) are readable and undamaged.
Proper use, maintenance, and storage are essential for this product to function properly.
o Always use this product in accordance with the instructions in this manual and consistent with any training relevant
to machines, devices, etc. used in conjunction with this product.
o Keep the product clean & dry. Lubricate moving parts.
o FOR HYDRAULIC UNITS: Do not use brake fluid or jack oils in the hydraulic system. If oil is needed, use an anti-
wear hydraulic oil with a viscosity grade of 150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron transmission fluid.
o Contact the manufacturer for MSDS information

Produkt Specifikationer

Mærke: Vestil
Kategori: Ikke kategoriseret
Model: AIR-2000

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil AIR-2000 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Vestil Manualer

Vestil

Vestil ATP-C-2436 Manual

18 September 2025
Vestil

Vestil D-33-MD Manual

18 September 2025
Vestil

Vestil LAD-13-14-P Manual

18 September 2025
Vestil

Vestil LAD-10-14-P Manual

18 September 2025
Vestil

Vestil IBC-TLT-FP Manual

18 September 2025
Vestil

Vestil D-350-10 Manual

18 September 2025
Vestil

Vestil D-400-HD Manual

18 September 2025
Vestil

Vestil AIR-2000 Manual

18 September 2025
Vestil

Vestil D-75-HD Manual

18 September 2025
Vestil

Vestil EHN-20-C Manual

18 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

T'nB

T'nB MHMECA Manual

18 September 2025
Marmitek

Marmitek BoomBoom 55 HD Manual

18 September 2025
CTA Digital

CTA Digital PAD-HFS Manual

18 September 2025
Active Intent Play

Active Intent Play GSBV16T Manual

18 September 2025
Cambro

Cambro VBRTHD6110 Manual

18 September 2025
Vicoustic

Vicoustic VicFix Base Manual

18 September 2025
Atlona

Atlona AT-VTPG-1000VL Manual

18 September 2025
T'nB

T'nB PBUWATCH Manual

18 September 2025
Lakeside

Lakeside 6745 Manual

18 September 2025
CTA Digital

CTA Digital PAD-QCWDM Manual

18 September 2025