Vestil AS-383-4PK Manual


Læs gratis den danske manual til Vestil AS-383-4PK (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vestil AS-383-4PK, eller vil du spørge andre brugere om produktet?

Side 1/6
TABLE OF CONTENTS Rev. 7/25/2022 AS-series anchor bolts, MANUAL
TABLE OF CONTENTS Copyright 2022 Vestil Manufacturing Co. Page 1 of 6
AS-SERIES CONCRETE ANCHORS
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The Department
can also be contacted online at https://www.vestil.com/page-parts-request.php
.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
https://www.vestil.com/page-
manuals.php.
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com info@vestil.com
Table of Contents
Page
Signal Words….…………………………………………………………………………………..………….……...…
2
Safety Instructions…………………………………..………………..……………………………..………………...…
2
Specifications…………………………………………………………………………………………………….……...
3
Torque Specifications…………………………………………………………………………………………………..
3
Selecting an Anchor for your Application………………………..……………..………………..……………..
4
Installing Anchor Bolts…………………………..…………..…………………………….…………………….……..
4 - 5
Record of Satisfactory Condition………………………………………………………………………………...….
5
Inspections………………………………………………………………………………………………...…................
5
Maintenance……….………………………………………………………………………………………………....…
5
Limited Warranty…...…………………………………………………………………………………….…….………
6
TABLE OF CONTENTS Rev. 7/25/2022 AS-series anchor bolts, MANUAL
TABLE OF CONTENTS Copyright 2022 Vestil Manufacturing Co. Page 2 of 6
SIGNAL WORDS
SIGNAL WORDS appear in this manual to draw the reader’s attention to important safety-related
messages. The following are signal words used in this manual and their definitions.
SAFETY INSTRUCTIONS
We strive to identify hazards associated with the use of our products. However, no manual can address
every risk. The end-user must apply sound judgment whenever assembling, using, inspecting, or maintaining
this product.
WARNING
Material handling is dangerous. Improper or careless operation might result in serious personal injuries.
Failure to read and understand the entire manual before installing, inspecting or servicing the product.
Read the manual to refresh your understanding of proper use and maintenance procedures as necessary.
ONLY use these anchors to attach equipment/fixtures to even, level, concrete surfaces. DO NOT attempt
to anchor equipment/fixtures to sloped surfaces.
ONLY use these anchors to attach equipment/fixtures to dry concrete where the anchors will remain dry.
Water must not pool or soak any anchor.
DO NOT use am anchor unless it is in satisfactory condition. Inspect anchors according to the
INSPECTION instructions on p. 5 to determine whether it is in satisfactory condition.
DO NOT over tighten an anchor.
DO NOT modify wedge anchors in any way. Modifications automatically void the LIMITED WARRANTY on
p. 6and might make it unable to function as designed.
NOTICE
Proper use and maintenance are essential for keeping this product in SATISFACTORY CONDITION.
Always install, use, inspect, and maintain this product in accordance with the instructions in this manual
and consistent with any training relevant to all other devices, machines, equipment, etc. used with this
product.
Only use approved replacement parts. To order replacement or spare parts for this equipment, contact
the factory.
DANGER
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.
WARNING
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
NOTICE
Identifies practices likely to result in product/property damage, such as operation
that might damage the product.
!
!
!
!


Produkt Specifikationer

Mærke: Vestil
Kategori: Ikke kategoriseret
Model: AS-383-4PK

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil AS-383-4PK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vestil Manualer

Vestil

Vestil E-MT-6 Manual

17 September 2025
Vestil

Vestil LAD-MM-8 Manual

17 September 2025
Vestil

Vestil FLOW-4-3 Manual

17 September 2025
Vestil

Vestil LAD-MM-4-G Manual

17 September 2025
Vestil

Vestil AS-383-4PK Manual

17 September 2025
Vestil

Vestil PNU-3060 Manual

17 September 2025
Vestil

Vestil LAD-FM-84-PSO Manual

17 September 2025
Vestil

Vestil PLC-P-FM Manual

17 September 2025
Vestil

Vestil H-100-LD Manual

17 September 2025
Vestil

Vestil WTJ-2 Manual

17 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Canarm

Canarm CBFI300 Manual

17 September 2025
Lakeside

Lakeside 6205 Manual

17 September 2025
Turbo Air

Turbo Air TBC-80SB-N Manual

17 September 2025
Blodgett

Blodgett Invoq 61BG Manual

17 September 2025
Berker

Berker 85606100 Manual

17 September 2025
KStrong

KStrong UFS310010 Manual

17 September 2025
Wesco

Wesco 272938 Manual

17 September 2025
Texican

Texican TCD-1AL Manual

17 September 2025
Lakeside

Lakeside 4011 Manual

17 September 2025