Vestil CRP-120 Manual

Vestil Ikke kategoriseret CRP-120

Læs gratis den danske manual til Vestil CRP-120 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vestil CRP-120, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Table of Contents Rev. 7/7/2023 CRP, MANUAL

CRP-SERIES CARPET RAMS

Receiving Instructions

After delivery, remove the packaging from the product. Inspect the product closely to determine

whether it sustained damage during transport. If damage is discovered, record a complete description of

it on the bill of lading. If the product is undamaged, discard the packaging.

NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance

comply with laws, regulations, codes, and mandatory standards applied where the product is used.

Technical Service & Replacement Parts

For answers to questions not addressed in these instructions and to order replacement parts, labels,

and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department

can also be contacted online at https://www.vestil.com/page-parts-request.php.

Electronic copies of Instruction Manuals

Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-

manuals.php

Electronic Copies of Instruction Manuals

Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-

manuals.php.

Vestil Manufacturing Company

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

Web: www.vestil.com e-mail: info@vestil.com

Table of Contents Page

Signal Words……………………………………………..………………………………………………………..…....… 2

Safety Instructions…..……………………..……………………………………..………………………….……..….… 2

Specifications…………………………………..……………………………..…………………………………….….… 3

Exploded View & Bill of Materials……………..…………………….………..…………………………………....…. 3

National Standards……………………………………………………………………………………………………… 4

Using the Carpet Ram………………………………………….…………………………………………………...… 4

Record of Satisfactory Condition…………………………………………………………………………………….. 4

Inspections………………………………………………………………………………………………………………… 4 – 5

Maintenance……………………………………………………………………………………………………………...

Labeling Diagram…………..…...………………………………………………………………………………………. 5

Limited Warranty…...……………………………………………………………………………………………………. 6

Table of Contents Rev. 7/7/2023 CRP, MANUAL

SIGNAL WORDS

SIGNAL WORDS appear in this manual to draw the reader’s attention to important safety-related

messages. The following are signal words used in this manual and their definitions.

SAFETY INSTRUCTIONS

Vestil strives to identify foreseeable hazards associated with the use of its products, but no manual can

address every conceivable risk. Minimize the likelihood of injury by observing the hazards identified below

and by inspecting and maintaining the product as instructed in INSPECTIONS & MAINTNENANCE on p. 20.

WARNING

Risks of serious personal injuries or death. Always apply material handling techniques learned during

training and use the product properly.

 Read and understand the entire manual before assembling, using or servicing the product.

 Before using this (forklift) front end attachment, you must contact the manufacturers of all forklifts that

will use it to request: 1) written approval; and 2) markings for each forklift that identify the coil carrier AND

give the approximate weight of the forklift and carrier at maximum elevation with a laterally-centered

load. DO NOT use the carpet ram until your forklifts are marked.

 Read and understand the entire manual before installing, using, or servicing the product. Read the

manual to refresh your understanding of proper use, inspection, and maintenance procedures whenever

necessary.

 DO NOT exceed the capacity of your unit. See LABELING DIAGRAM, label 1153 on p. 5.

 Inspect the carpet pole before each use as described in INSPECTIONS on p. 4-5.

 Before attaching the carpet ram to the carriage of your fork lift, inspect the carriage and confirm that

all parts are structurally sound and in satisfactory condition. See RECORD OF SATISFACTORY CONDITION

on p. 4.

 Always connect the safety chain to the carriage of your forklift without slack. The unit must not be able

to slide on the forks.

 Verify that the load is stable by lifting the carpet just a few inches above the ground. Load swing

should be minimal and the carpet pole should not shift on the forks. If the load is not stable while

elevated, return it to the ground and use another device to transport it.

 ALWAYS apply the rules governing use of (forklift) front end attachments applied at your work site.

 DO NOT cover or remove any label. Verify the location and legibility of all labels. Label placement is

shown in the LABELING DIAGRAM on p. 5. DO NOT use this device UNLESS all product labels are readable

and undamaged.

 DO NOT ride or sit on the carpet pole.

 DO NOT use the carpet pole to push objects. Only use the product to transport a roll of carpet.

 ONLY use this product when traveling on firm, level, even ground.

 Carpet roll must not be longer than the pole. The carpet roll must not hang over the end of the pole.

See USING THE CARPET RAM on p. 4 for loading instructions.

 DO NOT leave elevated rolls of carpet unattended. Always lower the load to the ground before

leaving the forklift.

 DO NOT modify the carpet pole in any way UNLESS you first obtain written approval from Vestil.

Unauthorized modifications automatically void the LIMITED WARRANTY (see p. 6) and might make the

product unsafe to use.

DANGER

Identifies a hazardous situation which, if not avoided, WILL

result in DEATH or SERIOUS

INJURY. Use of this signal word is limited to the most extreme situations.

WARNING

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or

SERIOUS INJURY.

CAUTION

Indicates a hazardous

situation which, if not avoided, COULD result in MINOR or

MODERATE injury.

NOTICE

Identifies practices likely to result in product/property damage, such as operation

that might damage the product.

Produkt Specifikationer

Mærke:	Vestil
Kategori:	Ikke kategoriseret
Model:	CRP-120

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil CRP-120 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vestil Manualer

Vestil AWR-G-38-10A Manual

2 Oktober 2025

Vestil GR-H2R-DI-4-HDG Manual

2 Oktober 2025

Vestil GR-H2R-DI-11-YL Manual

2 Oktober 2025

Vestil HDD-48-15-P Manual

2 Oktober 2025

Vestil EHLTP-3648-1-48-A1 Manual

2 Oktober 2025

Vestil HPRO-SS-36-42-4 Manual

2 Oktober 2025

Vestil VAN-J-AC Manual

2 Oktober 2025

Vestil LPRO-92-9-4 Manual

2 Oktober 2025

Vestil AHSN-4-15-7-TLC Manual

2 Oktober 2025

Vestil ULTT-5448-4-YEL230-1 Manual

2 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony EP-NI1010S Manual

2 Oktober 2025

Draper Expert 23193 Manual

2 Oktober 2025

Sony YT-ICB630 Manual

2 Oktober 2025

GYS Caliweld Manual

2 Oktober 2025

Draper Expert 15694 Manual

2 Oktober 2025

Structural Concepts Fusion GHSS656RLB Manual

2 Oktober 2025

Gardol GRW-E 57 Manual

2 Oktober 2025

Bluemarina Mapuna Sport Manual

2 Oktober 2025

Draper Expert 16245 Manual

2 Oktober 2025

Draper Expert 64333 Manual

2 Oktober 2025