THANK YOU FOR USING THIS DRUM STACKER. FOR YOUR SAFETY AND CORRECT OPERATION,
PLEASE CAREFULLY READ THIS INSTRUCTION BEFORE USING IT. ONLY THOSE WHO HAVE
BEEN TRAINED AND AUTHORIZED CAN OPERATE THIS DRUM STACKER.
NOTE: All of the information reported herein is based on data available at the moment of printing. The
factory reserves the right to modify its own products at any moment without notice and incurring in any
sanction. So it is suggested to always verify possible updates.
Warning: Infringe the safety rules and operation instructions in this manual may cause serious injuries or
1.1 It is forbidden to operate this machine unless:
1) You have learned and obeyed all the safety rules in this manual.
Avoid causing personal accident.
Always make a check before operation.
Make functional test before use.
Check the working place.
Only use it to convey, lift, revolve and tilt the drum.
2) You read, understand and obey
Guides and safety rules of the manufacturer
Safety rules of workers and regulations of working place
Proper government ordinances
1.2 You should obey the following rules to avoid causing personal accident:
It is forbidden to use it as a platform or ladder to lift persons.
Only use it to convey, lift, revolve and tilt the drum.
Only use it on a firm and level ground.
Check for drop-offs, pits, barriers, debris, unstable ground and other dangerous conditions at the
working place before the operation.
It is forbidden to bear the machine or the drum of horizontal force during the operation process.
Check whether there are some barriers or other possible dangers at the top of working place.
It is forbidden for the operator or other persons to stand under the machine when lifting or tilting
It is forbidden to lower the load unless there is no person or barrier under the load.
Always keep your hands, feet and other body parts away from the clamping points, sliding guide or
Injury caused by misuse
It is forbidden to lift or transport the load unless all clamps have fixed the drum firmly.
Lift or lower the load at a uniform speed and slowly. Sudden start or stop is forbidden.
Faulty methods of operating the machine may cause accidents
Injury caused by machine fault
Never operate a faulty or damaged machine.
Make a thorough check before the operation every time.
Make sure all the markings are intact and correct.
