Table of Contents 2/2/21 FM, MANUAL.DOCX
Table of Contents Copyright 2020, Vestil Manufacturing Corp. Page 2 of 20
Table of Contents
Signal words … … … … … … … … … … … … 2
Hazards … … … … … … … … … … … … 2
Model number and capacity … … … … … … … … … … 3
Major components and orientation … … … … … … … … … 4
Exploded parts diagram and Bill of Material … … … … … … … … 4
Installation instructions … … … … … … … … … … 5
Record of satisfactory condition … … … … … … … … … 15
Operation instructions … … … … … … … … … … … 15
Inspection and maintenance … … … … … … … … … … 17
Adjusting spring tension … … … … … … … … … … 17
Replacement parts … … … … … … … … … … … 18
Labeling diagram … … … … … … … … … … … 19
Limited warranty … … … … … … … … … … … 20
SIGNAL WORDS
This manual uses SIGNAL WORDS to direct the reader’s attention to important safety-related messages.
These messages describe uses of the product that could result in personal injury or property damage. Each
signal word corresponds to a specific hazard level. The following are definitions of signal words that might
appear in this manual.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.
HAZARDS
Vestil Manufacturing strives to identify all foreseeable hazards associated with the use of its products.
However, material handling is dangerous and no manual can address every risk. Ultimately, the most effective
way to prevent injury is for persons who use this dock leveler to apply sound judgment whenever using this
device.
Improper or careless operation of this device might result in serious personal injuries.
Read and understand this entire manual before installing, assembling, using or servicing this
dock leveler. Keep this manual in a location known to persons who use the dock leveler. Read the
manual whenever necessary to refresh your understanding of proper use, inspection, and maintenance
procedures.
The Edge-O-Dock Leveler presents falling, pinch point, and impact hazards to the user and bystanders.
ALWAYS follow these instructions to avoid injury.
DO weld the dock leveler securely to the dock face before use. DO anchor the dock leveler to the dock
if necessary. See the Installation Instructions starting on page 5.
DO NOT install the dock leveler in a dock that is not flat and level. It is acceptable for the driveway
surface below the dock to be inclined towards or away from the dock edge.
DO inspect the dock leveler for damage or defects prior to use every day. DO NOT use a dock leveler
that is damaged or is not working properly.
