Vestil HDC-905-IDC Manual

Vestil Ikke kategoriseret HDC-905-IDC

Læs gratis den danske manual til Vestil HDC-905-IDC (19 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vestil HDC-905-IDC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/19

Rev. 2/21/2017 HDC-905, MANUAL

HDC-905 Series Hydraulic Drum Crushers

Instruction Manual

HDC-905-IDC

HDC-905-HC

Receiving instructions:

After delivery, IMMEDIATELY remove the packaging from the product. Then, inspect the unit closely to determine

whether it sustained damage during transport. If damage is discovered, immediately record a complete

description of the damage on the bill of lading. If the product is undamaged, discard the packaging.

Notes:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product

is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:

a) Instructions in this manual; or b) information provided on product labels.

Vestil Manufacturing Corp.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

www.vestilmfg.com e-mail: info@vestil.com

Table of Contents:

Signal Words……………………………………………..……………………………………………………………..………….. 2

Safe Use Recommendations……………..……………………………………………..…………………………..…….……… 2

Hydraulic circuit diagram…….……………………………………………………………………………………………………. 3

Specifications…………………………………..………………………………………………………..…………..…….………. 3

FIG. 1: HDC-905-IDC exploded parts diagram & bill of materials………...……………………………..…………………… 4

FIG. 2: HDC-905-HC exploded parts diagram & bill of materials…………………………………………………………….. 5

FIG. 3: Power unit exploded parts diagram & bill of materials………...…………………..…………………………………..6

FIG. 4: Detailed parts breakdown of manifold assembly………………

……………………………………………………… 7

Manifold, pressure switches, and valves……………….……………………………………………………………………….. 8

Hydraulic valve and pressure switch adjustment procedure………………………………………………………………….. 9

Electrical controls sequence of operation……………………………………………………………………………………… 10

Electrical system specifications…………………………………………………………………………………………………. 10

FIG. 9: Standard 3-phase electrical circuit diagram (22124024 rev. F)…………………………………………………….. 11

FIG. 10: 3-phase continuous run electrical circuit diagram (22124025 rev. C)…………………………………………….. 12

FIG. 11: Single phase 115VAC electrical circuit diagram (22124026 rev. D)……………………………………………….13

FIG. 12: Single phase 208/230VAC electrical circuit diagram (22124027 rev. E)…………………………………………. 14

Installation…………………………………………………………………………………………………………………………. 15

Loading the chamber……………………………………………………………………………………………………………... 15

Operation………….……………………………………………………………………………………………………………….. 15

Platen configurations…………………………………………………………………………………………………………… ... 16

Maintenance………………………………………………………………………………………………………………………. 16

Labeling Diagram…………….....………………………………………………………………………………………………… 17

Limited Warranty (all units except “Wash down” model HDC-905-WD)...……………..………………………………..….. 18

Limited Warranty (HDC-905-WD only)…………………………………………………………………………………………. 19

Rev. 2/21/2017 HDC-905, MANUAL

Signal Words:

This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable seriousness of

those injuries, if the product is misused in the ways described. Other signal words call attention to uses of the product likely

cause property damage. The signal words used appear below along with the meaning of each word

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS

INJURY.

Identifies practices likely to result in product/property damage, such as operation that might

damage the product.

Safe Use Recommendations:

Vestil strives to identify foreseeable hazards associated with the use of its products. However, material handling is

dangerous and no manual can address every conceivable risk. Ultimately, the most effective way to avoid injury is for the

operator to exercise sound judgment whenever using this machine.

Improper or careless operation might result in serious personal injuries or death.

 Failure to read and understand the entire manual before installing, using or servicing the product constitutes misuse.

 Read the manual to refresh your understanding of proper use and maintenance procedures.

 Do not operate the crusher with the loading door open.

 Do not operate the machine if the emergency stop switch does not function properly.

 Do not stand in front of the door during operation.

 Keep clear of all moving parts during operation.

 High pressure oil easily punctures skin which can cause injury such as gangrene. If a hose or coupling develops a

leak, repair the leak before operating the crusher.

 Do not continue to use the crusher if it is damaged or makes unusual noises during operation.

 Do not change the pressure relief valve setting! In particular, do not increase the setting.

 Do not clean out drum crusher unless power is disconnected.

 Do not attempt to crush smooth-walled drums with this machine. Drums must be ribbed to crush properly.

 Do not attempt to crush drums filled with items or materials. Only use this unit to crush empty drums.

 Do not use brake fluids or jack oils in the hydraulic system. Only use AW-32 hydraulic oil or its equal.

 Do not modify the product in any way. Unauthorized modifications might make the lifter unsafe to use and

automatically void the Limited Warranty (see p. 18 and 19).

 DO NOT use this device unless every label is in place and easily readable. (See “Labeling Diagram” on. p. 17)

Hydraulic circuit diagram:

Item

Part no. Description Qty.

1 22-135-010

6.5HP, 3-phase, 1740/1440RPM,

184T, 9T spline, 230/460TEFC

2 22-143-001

Pump, 0.97/0.499in

, 9T spline shaft,

2-section

3 99-153-035

Cartridge valve, check, nose-in, side-

out, size 10

4 22-127-015

Manifold, HDC-905 with decom-

pression check valve

5 99-153-028 Valve, sequence, internal pilot + drain 1

6 99-153-037 Relief valve, 200-350bar, size 10 1

7 99-153-065 4-way, 3-position motor spool, DO5 1

8 ZCO-42 Check valve, nose it, side out, size 08 1

9 99-021-926 Piston cylinder, 4”x36”, flange mount 1

10 1710

Valve, check, pilot-to-open, 30psi

crack, 3:1, size 10

11 1808-65 Check valve, 08, 25psi cracking 1

12 22-031-007 Spin-on filter, 10 micron 1

13 22-514-010 Reservoir, hydraulic, steel, 15gal. 1

14 99-031-035 Inlet screen, 100mesh, 1” FNPT inlet 1

15 6408-H-04 O-ring plug, socket-head, size 04 7

Produkt Specifikationer

Mærke:	Vestil
Kategori:	Ikke kategoriseret
Model:	HDC-905-IDC

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil HDC-905-IDC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vestil Manualer

Vestil HDC-905-IDC Manual

20 August 2025

Vestil DCR-205-20 Manual

20 August 2025

Vestil DRUM-LRT-EC Manual

20 August 2025

Vestil CAN-S Manual

20 August 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

Vestil FE-4-72 Manual

15 Juni 2025

Vestil L-220-HD Manual

15 Juni 2025

Vestil FE-4-63 Manual

14 Juni 2025

Vestil L-270-HD Manual

14 Juni 2025

Vestil FE-5-72 Manual

14 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vonroc PM510DC Manual

20 August 2025

Chauvet Maverick Force X Profile Manual

20 August 2025

Pioneer CA-RP-BMW.002AE Manual

20 August 2025

Marantz Rack Mix 12 Manual

20 August 2025

MRCOOL MGM80SE090C5A Manual

20 August 2025

Sonnenkönig GLASKON 2000 Manual

20 August 2025

Pioneer CA-R-SSK.003 Manual

20 August 2025

Pioneer CA-HM-BMW.006AA Manual

20 August 2025

Tefal Raclette Invent RE5000 Manual

20 August 2025

NEO Tools 81-640 Manual

20 August 2025