Eliminator Lighting Electro 64 BLED Manual

Eliminator Lighting Ikke kategoriseret Electro 64 BLED

Læs gratis den danske manual til Eliminator Lighting Electro 64 BLED (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Eliminator Lighting Electro 64 BLED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Electro 64 BLED

©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com

Introduction:

This unit 4 channel DMX intelligent LED par can. The Electro 64 BLED has 6 operating modes; sound active

mode, auto mode, color mode, color change mode, color fade mode, or DMX control mode. The unit can be

run as a stand alone unit or in a Master/Slave configuration. This unit has been tested and there is no assem-

bly required. The unit is ready to be plugged in to a power outlet. To enhance the beams effects you can use a

fog machine.

CAUTION! Please read and understand these instructions before installing or operating this unit.

SPECIFICATIONS:

Model: Electro 64 BLED

LED: 36 x 1W LEDs (12 Red,

12 Green, & 12 Blue)

Weight: 19lbs./ 3.6kgs.

Size: 12” (H) x 10.5” (W) x

10” (L)

Beam Angle: 30 Degrees

Fuse: 1 Amp

Supply Voltage: 110V/230V 50/60Hz

Power Consumption: 40W

Working Position: Any Safe position

Duty Cycle: None

DMX Channels: 4 DMX Channels

Warranty: 1 Year

CAUTION! Please read and understand these

instructions before installing or operating this unit.

1 Year Limited Warranty: Eliminator Lighting warranty is valid from the date of purchase. Our

1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with

dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover

items or parts prone to wear and tear: motors, fuses, brushes and belts. Eliminator Lighting warranty

is only valid with-in the United States.

Fuse Replacement: Locate and remove the

unit’s power cord. Using a phillips-head screw

driver unscrew and remove the . Remove the bad

fuse and replace with a new one. The fuse holder

has a built-in socket for a spare fuse be sure not

to confuse the spare fuse with active fuse.

DMX TRAITS: 4 CHANNELS

CHANNEL 1: COLORS

0 - 255 = RED 0%-100%

CHANNEL 2: COLORS

0 - 255 = GREEN 0%-100%

CHANNEL 3: COLORS

0 - 255 = BLUE 0%-100%

CHANNEL 4: DIMMER/STROBE

0 - 189 = DIMMER 0% - 100%

190 - 250 = STROBE SLOW - FAST

251 - 255 = NO FUNCTION

Produkt Specifikationer

Mærke:	Eliminator Lighting
Kategori:	Ikke kategoriseret
Model:	Electro 64 BLED

Har du brug for hjælp?

Hvis du har brug for hjælp til Eliminator Lighting Electro 64 BLED stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Eliminator Lighting Manualer

Eliminator Lighting Electro 64 BLED Manual

4 November 2025

Eliminator Lighting E 108 Manual

1 November 2025

Eliminator Lighting EUV 10 Manual

1 November 2025

Eliminator Lighting EX-6 Manual

31 Oktober 2025

Eliminator Lighting E 103 Manual

31 Oktober 2025

Eliminator Lighting LED Cloud Manual

30 Oktober 2025

Eliminator Lighting E 107 Manual

30 Oktober 2025

Eliminator Lighting Tri Disc 9 IR Manual

30 Oktober 2025

Eliminator Lighting EX-2 Manual

30 Oktober 2025

Eliminator Lighting EF 1000 Manual

29 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Trident PreAmp 80B-PRE Manual

4 November 2025

HYTE Keeb TKL Manual

4 November 2025

Sonifex HY-03DTD Manual

4 November 2025

MSI FORGE GK110 Manual

4 November 2025

Sonifex Redbox RB-DD4 Manual

4 November 2025

WesAudio ngTubeComp Manual

4 November 2025

Listen LR-4200-216 Manual

4 November 2025

Digital Watchdog SiteWatch DW-SWSP15A Manual

4 November 2025

Wooden Camera 162600 Manual

4 November 2025

DS18 VOC10LD-PK Manual

4 November 2025