Vestil S-2CB-118 Manual

Vestil Gaffeltruck S-2CB-118

Læs gratis den danske manual til Vestil S-2CB-118 (16 sider) i kategorien Gaffeltruck. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Vestil S-2CB-118, eller vil du spørge andre brugere om produktet?

Side 1/16
S-2CB, Manual.doc
Copyright 2015. Vestil Manufacturing Corp. Page 1 of 16
S-2CB-SERIES COUNTER-BALLANCE STACKER
OPERATION AND MAINTENANCE MANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered during the inspection,
immediately
record a complete description of the damage on the bill of lading. If the product is
undamaged, discard the packaging.
NOTES
:
1) Complian
ce with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) Information provided on labels affixed to the product.
Neither is Vestil
responsible for any consequential damages sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.
TABLE OF CONTENTS PAGE TABLE OF FIGURES PAGE
Safety Principles 2
Product Introduction 2
Safety Guidelines 3
Removing EPT from Pallet 3 - 4
Use, 1
st
Inspection, & Functions Tests 6
Operation
6 - 7
Lifting & Transporting Loads
7
Batteries & Charger
7 - 8
Troubleshooting
9 - 13
5
14-15
16
VESTIL MANUFACTURING CORP.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com e-mail: sales@vestil.com
FIG. 5 Function Controls, Gauges, & Safety Features
Maintenance & Inspections
Markings
S-2CB, Manual.doc
Copyright 2015 Vestil Manufacturing Corp.
Page 2 of 16
PRODUCT INTRODUCTION
Specifications appear in the table below:
Vestil Manufacturing Corp. created this manual to acquaint owners and users of our electric pallet trucks
with safe operation and maintenance procedures. Employers are responsible for instructing employees to
use the product properly. Employees and any other persons, who might foreseeably use, repair, or
perform maintenance on the EPT must read and understand every instruction BEFORE using the device.
Cart operators should have access to the manual at all times and should review the directions before each
use. Contact Vestil for answers to any question you have after reading the entire manual.
Although Vestil diligently strives to identify foreseeable hazardous situations, th
is manual cannot address
every conceivable danger. The end-user is ultimately responsible for exercising sound judgment at all times.
SAFETY PRINCIPLES
We offer two types of counter-balance stackers (S-2CB): 2,000 pound (~907kg) capacity models.
Each unit conforms to the generalized specifications disclosed in this manual and fulfills our demanding standards
for quality, safety and durability.
Vestil Manufacturing Corp. recognizes the critical importance of workplace safety. Each person who might
participate in operation or maintenance of the product must read this manual. Read the entire manual and fully
understand the directions BEFORE using or performing maintenance on the cart. If you do not
understand an instruction, contact Vestil for clarification. Failure to adhere to the directions in this
manual might lead to serious personal injury or even death.
Vestil is not liable for any injury or property damage that occurs as a consequence of failing to apply the safe
operation and maintenance procedures explained in this manual or that appear on labels affixed to the product.
Furthermore, failure to exercise good judgment and common sense may result in property damage, serious
personal injury, or death, and also are not the responsibility of Vestil.
This manual applies the hazard identification methods suggested for instruction manuals by the American
National Standards Institute (ANSI). In accordance with ANSI guidelines for hazard identification language, this
manual classifies personal injury risks and situations that could lead to property damage with SIGNAL WORDS.
These signal words announce an associated safety message. The reader must understand that the signal word
chosen indicates the seriousness of that hazard according to the following convention:
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices not related to personal injury, such as operation that could damage the cart.
No safety alert symbol (equilateral triangle enclosing an exclamation point) accompanies this
signal word.
Thank you for purchasing Counter Balance Stacker (“S-2CB-118,” “counter-
balance stacker,” “truck,” or “unit”) offered by Vestil Manufacturing Corporation
(“Vestil”). Our counter-balance stackers are durable, high-quality products that
combine safety features and low-maintenance mechanisms. Despite the product’s
relatively simple mechanics, all personnel must familiarize themselves with the safe
operation instructions provided in this manual.


Produkt Specifikationer

Mærke: Vestil
Kategori: Gaffeltruck
Model: S-2CB-118

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil S-2CB-118 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Gaffeltruck Vestil Manualer

Gaffeltruck Manualer

Nyeste Gaffeltruck Manualer

Draper

Draper 85655 Manual

2 Oktober 2025
Jungheinrich

Jungheinrich EFG 535 Manual

22 September 2025
Jungheinrich

Jungheinrich EFG D30 Manual

22 September 2025
Jungheinrich

Jungheinrich EFG 425 Manual

22 September 2025
Jungheinrich

Jungheinrich EFG 550 Manual

22 September 2025
Jungheinrich

Jungheinrich EFG DHAC10 Manual

21 September 2025
Jungheinrich

Jungheinrich EFG 316 Manual

21 September 2025
Jungheinrich

Jungheinrich EFG 110 Manual

21 September 2025
Jungheinrich

Jungheinrich EFG 220 Manual

21 September 2025