Vestil ALL-T-2-48 Manual

Vestil Gaffeltruck ALL-T-2-48

Læs gratis den danske manual til Vestil ALL-T-2-48 (9 sider) i kategorien Gaffeltruck. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vestil ALL-T-2-48, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

INSTRUCTION MANUAL

ALL TERRAIN PALLET TRUCK

HAND PALLET TRUCK

WARNING !

1. Read and understand instruction manual before using the pallet truck.

2. Do not place hands or feet under the pallet truck at any time.

3. Do not operate loaded pallet truck on ramps or inclines.

4. Do not tip loaded pallet truck forks. This may cause damage to the forks and

personal injury if the rear of the pallet truck suddenly “pops up”.

5. Never leave a loaded pallet truck unattended in the raised position.

6. Do not load pallet truck beyond its rated capacity.

7. Secure load before transporting.

8. To prevent accidental tipping, make sure load is centered on the forks.

9. Do not move a loaded pallet truck by other than manual force.

10. Failure to comply with these warnings may result in personal injury and/or

property damage.

NOTE: Materials, design, and specifications are subject to change without

notice.

Introduction

Thank you for purchasing an ALL-T-2 manual pallet truck. This pallet truck was designed to traverse rough

terrain where no ordinary pallet truck can go and is adapted for use in settings such as garden nurseries,

construction sites, and marinas. The truck features a high quality hydraulic pump with welded construction

and chrome plated piston and pump plunger ensure durability and corrosion resistance. All the joints are

fitted with seals to ensure sealing and keep the body from oil leaking. Safety by-pass valve helps protect

against overload. 3-position control handle allows operator to lower, raise and engage pump into neutral

position with a simple tough of the lever. Strong & light tubular steel framing and adjustable fork width.

Large pneumatic tires make handling pallets of most sizes possible without the need for a forklift.

Specifications

Produkt Specifikationer

Mærke:	Vestil
Kategori:	Gaffeltruck
Model:	ALL-T-2-48

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil ALL-T-2-48 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Gaffeltruck Vestil Manualer

Vestil ALL-T-2 Manual

8 Oktober 2025

Vestil ALL-T-HD Manual

7 Oktober 2025

Vestil ALL-T-2-48 Manual

7 Oktober 2025

Vestil ALL-T-1-GPT-ST-L Manual

7 Oktober 2025

Vestil VHPS-2000-AA-35 Manual

3 Oktober 2025

Vestil HIPM-2748-AIR Manual

2 Oktober 2025

Vestil S-62-FA Manual

2 Oktober 2025

Vestil VWS-770-AA-DC Manual

2 Oktober 2025

Vestil EPT-2748-45-RP-AGM Manual

1 Oktober 2025

Vestil VHPS-2000-FF-118 Manual

1 Oktober 2025

Gaffeltruck Manualer

Nyeste Gaffeltruck Manualer

Crown CGC45S-5 Manual

8 Oktober 2025

Crown CGC35S-5 Manual

8 Oktober 2025

Draper 85655 Manual

2 Oktober 2025

Jungheinrich EFG 535 Manual

22 September 2025

Jungheinrich EFG VAC 25S Manual

22 September 2025

Jungheinrich EFG D30 Manual

22 September 2025

Jungheinrich EFG 425 Manual

22 September 2025

Jungheinrich EFG 550 Manual

22 September 2025

Jungheinrich EFG DHAC10 Manual

21 September 2025

Jungheinrich EFG 316 Manual

21 September 2025