
Operator’s Manual Rev. 6/11/25 WL-100 MANUAL 06-25.DOCX
Table of Contents Copyright 2023, Vestil Manufacturing Corp. Page 2 of 30
Table of Contents
Signal words … … … … … … … … … … … … 2
Hazards … … … … … … … … … … … … 2
Model number and capacity … … … … … … … … … … 4
Exploded assembly views … … … … … … … … … … 5
Electrical system diagrams … … … … … … … … … … 13
Installation instructions … … … … … … … … … … 17
Record of satisfactory condition … … … … … … … … … 22
Operation instructions … … … … … … … … … … … 22
Inspection and maintenance … … … … … … … … … … 25
Troubleshooting guide … … … … … … … … … … … 28
Labeling diagram … … … … … … … … … … … 29
Limited warranty … … … … … … … … … … … 30
SIGNAL WORDS
This manual uses SIGNAL WORDS to direct the reader’s attention to important safety-related messages. These
messages describe uses of the product that could result in personal injury or property damage. Each signal word
corresponds to a specific hazard level. The following are definitions of signal words that might appear in this manual.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY.
Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product.
HAZARDS
Vestil Manufacturing strives to identify all foreseeable hazards associated with the use of its products. However,
material handling is dangerous and no manual can address every risk. The end user is ultimately responsible for
exercising sound judgment at all times in the use of this product.
Improper or careless operation of this Lift might result in serious personal injuries.
Read and understand this entire manual before installing, assembling, using or servicing this Premium Scissor
Dock Lift (“Lift”). Keep this manual in a location known to persons who use the Lift. Read the manual whenever
necessary to refresh your understanding of proper use, inspection, and maintenance procedures. Failure to read
and understand this owner’s manual before using or servicing the Lift constitutes a misuse of the product.
The Lift presents pinch point and hydraulic pressure hazards to the user and bystanders. ALWAYS follow these
instructions to avoid injury.
The Lift is intended for use on a level concrete surface. DO NOT use a Lift that has not been anchored to a level
concrete surface. See installation instructions starting on page 17.
The Lift shall be installed only by trained and qualified personnel with access to appropriate equipment.
Electrical connections shall be performed by a qualified electrician.
DO NOT load the Lift beyond its lift rated capacity. Handle only stable and safely arranged loads within the
maximum capacity of the Lift. The lift capacity is printed on the nameplate on the hinged end of the platform.