Vestil WP-3648-84B Manual


Læs gratis den danske manual til Vestil WP-3648-84B (17 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vestil WP-3648-84B, eller vil du spørge andre brugere om produktet?

Side 1/17
Table of Contents Rev. 4/12/2024 WP, MANUAL
Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 1 of 17
Work Platforms: Models WP & SP
Instruction Manual
MODEL: WP-3737-FD WP-SERIES SP-SERIES
CAPACITY: 600LB. (273KG) 1,000LB. (455KG) 1,000LB. (455KG)
Table of Contents Table of Figures
Specifications…………………………………... 3 Fig. 1: WP-series Exploded View & Bill of Materials.….... 7
Signal Words…..……………………................. 4 Fig. 2: SP-175 series Exploded View & Bill of Materials... 7
Safety Instructions……..…………................... 5 Fig. 3: Center of Gravity Diagram….……………………… 8
Record of Satisfactory Condition…………….. 6 Fig. 4: Mast Guard Hinge….……………..……………… 8
Inspections……………………………………… 6 Fig. 5A & 5B: Tine Lock Operation…..….……..…………. 9
Mounting the Platform on your Fork Truck..... 9 - 10 Fig. 6: Proper attachment of nylon safety strap……........ 10
Using the Platform……………………………... 10 - 11 Fig. 7: Caster Installation……………..…………………….. 13
WP-3737-FD Setup/Fold-Down………………. 11 - 12 Fig. 8: FTJB & WPJB mounting diagram.………………… 14
Caster Installation (Select WP Models Only).. 13 Fig. 9: E-Stop electrical system diagram…………………. 14
Emergency Stop Switch Installation………….. 14 Fig. 10: Mounting WPJB.…………………………………… 14
Labeling Diagrams (3737-FD; WP; SP)……... 12, 15, 16 Fig. 11: [WPJB] Fastener order.………………………… 14
Limited Warranty…………………………….…. 17
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the bill
of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also
be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic Copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-
manuals.php.
KEEP A COPY OF THIS MANUAL IN A LOCATION KNOWN TO ALL PERSONS WHO USE THIS WORK
PLATFORM. ADDITIONAL COPIES OF THE MANUAL CAN BE DOWNLOADED FROM
https://www.vestil.com/page-manuals.php. DO NOT USE THE PLATFORM UNLESS EVERY LABEL, SIGN,
AND TAG SHOWN IN APPLICABLE LABELING DIAGRAM (P. 12, 15, OR 16) IS IN PLACE, UNDAMAGED, &
EASILY READABLE.
Vestil Manufacturing Company
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 Toll Free (800) 348-0868
Fax: (260) 665-1339 www.vestil.com e-mail: info@vestil.com
SP-175-84B
shown
Table of Contents Rev. 4/12/2024 WP, MANUAL
Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 2 of 17
NOTES
MODEL
DATE PURCHASED
OPTIONS INSTALLED
FORK TRUCK(S) DESIGNATED TO
CARRY THIS WORK PLATFORM
NET WEIGHT OF WORK
PLATFORM (FROM
SPECIFICATIONS DOCUMENT;
SEE P. 3)
WEIGHT OF FULLY LOADED
PLATFORM [NET WEIGHT + 1000
POUNDS; SEE SAFETY
INSTRUCTIONS, 3
RD
WARNINGS
BULLET POINT, ON P. 5
RELEVANT OSHA RULES
1) Lift trucks used in Construction settings:
29 CFR 1926.602(c)(1)(ii)
No modifications or additions which affect the capacity or safe operation of the equipment shall be
made without the [lift truck] manufacturer's written approval. If such modifications or changes are made,
the capacity, operation, and maintenance instruction plates, tags, or decals shall be changed
accordingly. In no case shall the original safety factor of the equipment be reduced.
2) Lift trucks used in General Industry settings:
1910.178(a)(4)
Modifications and additions which affect capacity and safe operation shall not be performed by the
customer or user without manufacturers prior written approval. Capacity, operation, and maintenance
instruction plates, tags, or decals shall be changed accordingly.
1910.178(a)(5)
If the truck is equipped with front-end attachments other than factory installed attachments, the user
shall request that the truck be marked to identify the attachments and show the approximate weight of
the truck and attachment combination at maximum elevation with load laterally centered.
MANUFACTURER(S) OF FORK
TRUCK(S)
DATE(S) 1910.178(a)(5) AND/OR
1926.602(c)(1)(ii) MARKINGS
REQUESTED FROM TRUCK
MANUFACTURER(S)
OTHER NOTES


Produkt Specifikationer

Mærke: Vestil
Kategori: Ikke kategoriseret
Model: WP-3648-84B

Har du brug for hjælp?

Hvis du har brug for hjælp til Vestil WP-3648-84B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vestil Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer