NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
Dust Barrier System
TOUGH TOOLS, HALF PRICE
030201
Safety Notice
Model:RECHDB1/RECHDB2
WARNING:
1.Read this material before using this product.
2. Flammable: Keep away from open flame. This
product will ignite and burn if brought into contact with
an open flame.
3. Keep away from sharp points,blades and other
items,so as not to scratch the product.
4. This product is not a toy, Dust barrier system cannot
be used as toys for children to play with.
5. Test the tape on a discrete surface before using. Use
on clean, dry surface. Don’t intended to use with
lacqurers, wall paper, unpainted wallboard, surface with
dust.
Assembly precautions
1.Assemble only according to these instructions.
2. Wear ANSI-approved safety goggles and heavy-duty
work gloves during assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
SAVE THESE INSTRUCTIONS
Assembly Instruction
1. Unlock the extension poles and measure the maxi-
mum extension length. Make the extension poles about
3-5cm longer than the ceiling height and lock the poles.
Making the extension poles a little bit higher than the
ceiling will secure the poles tightly standing upright
between the floor and ceiling.
2. Use a double sided tape to stick the film before
installing the extension pole.
3. Lift the film with extension poles and install the
extension pole on the appropriate position you need,
fasten and lock it.
4. Find the right place you want to make a door and
stick the magnetic zipper on the appropriate place of
the film sheeting.
①Flow the “stick this side” sign and stick the double
sided tape on the magnetic zipper door.Leave a small
gap in the middle of zipper in case the glue stick
together.
② Find the correct place you want to make a temporary
