NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
Dust Barrier System
TOUGH TOOLS, HALF PRICE
030201
Safety Notice
Model:RECHMDOOR1/RECHMDOOR2
WARNING:
1.Read this material before using this product.
2. Flammable: Keep away from open flame. This
product will ignite and burn if brought into contact with
an open flame.
3. Keep away from sharp points,blades and other
items,so as not to scratch the product.
4. This product is not a toy, Dust barrier system cannot
be used as toys for children to play with.
5. Test the tape on a discrete surface before using. Use
on clean, dry surface. Don’t intended to use with
lacqurers, wall paper, unpainted wallboard, surface with
dust.
Assembly precautions
1.Assemble only according to these instructions.
2. Wear ANSI-approved safety goggles and heavy-duty
work gloves during assembly.
3.Keep assembly area clean and well lit.
4.Keep bystanders out of the area during assembly.
SAVE THESE INSTRUCTIONS
Assembly Instruction
1. Clean off doorway and door frame prior to installation
2. Stick the double sided tape on the door frame
3. Recognize the top and bottom side of door sheet.
4. Peel off the release paper from the tape and stick the
magnetic door sheet onto the frame. Please be noted
that sticking the tape on the plastic sheet instead on the
blue fabric. There is stick here sign on the top of the
sheet, follow the sign.
5. Press the film to the tape firmly to make sure door
sheeting is tightly taped.
6. When removing the door sheet, peel off the tape
slowly to avoid damage to the surface.
Attention
If the magnetic is not closing properly, adjust the
tightness of film sheeting.
Stick the top side of door sheet correctly.
1. Stick double sided tape on the surface
2. Peel off the release paper
3. Find the right place to stick the door sheet, especially
the top side. Stick the magnetic door sheeting and
press tightly.
Attention:Follow the stick here sign
