1. Before lnstallation, make sure it does not run the risk
of piercing any hidden current cables or water pipes. In
case of doubt, use a digital tracking device or consult
for an expert.
2. The rail should be mounted on stable surface. Do
not overload.
3. The installation of the wall mount should be done by
an adult, children should not use it without supervision.
4. Recommended for brick and concrete only; use
special hardware for installing to plasterboard or other
substrates.
5. Please make sure the wall mount is installed on a
stable wall and avoid installing it in a humid, flammable
or high temperature environment. otherwise the hanger
may be damaged or items may fall, resulting in
personal injury or property loss.
6. Regularly check the stability and safety of the
hanger, and stop using it immediately if there is any
damage or suspected problem.
7. Please read and understand this manual carefully
before installing and using the wall mount.
This is the original instruction, please read all manual instructions carefully before
operating. VEVOR reserves a clear interpretation of our user manual. The
appearance of the product shall be subject to the product you received. Please
forgive us that we won't inform you again if there are any technology or software
updates on our product.
NEED HELP? CONTACT US!
030201
Model: RF-QJ032；RF-QJ033；RF-QJ034；
RF-QJ035
Have product questions? Need technical support? Please
feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
1. WARNING!
2. Maintenance Guide
1．Wipe the wall hanger regularly with a dry cloth to
keep it clean.
2．If the hanger is damaged or loose in any way, it
should be repaired or replaced immediately.
3．Do not hang heavy items on the hanger, so as not
to damage the hanger.
3. Product Description
The Wall Rack is a well-designed and easy-to-use
storage solution that is mainly mounted on a vertical
wall and used as a garage storage device for
organizing cleaning tools, gardening tools, hand/power
tools. The product is mainly composed of hooks and
rails. The length of the rails is large, the hooks and rails
are highly adaptable, and the distance between the
hooks is adjustable.
4. Installation Guide!
Step 1.Locate and mark your rails, install 6 screws per
rail, if necessary, user can add screws in spare holes
Step 2.Make Holes in the
wall with a drill, and insert
the dowels into the holes
by using hammer.
Step 3.Make sure the top
and bottom of rail
areinstalled in the right
direction.
Step 4.Install the steel rail
and tighten the screw
Step 5.Snap your hooks on
the rails and adjust the
distance between two hooks
with appropriate distance.
Step 6.The installation is
complete.
