Viewsonic PJ-IWBADP-004 Manual

Viewsonic Tilbehør til projektor PJ-IWBADP-004

Læs gratis den danske manual til Viewsonic PJ-IWBADP-004 (1 sider) i kategorien Tilbehør til projektor. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Viewsonic PJ-IWBADP-004, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
Installation Instructions
Adapter Plate
ViewSonic Corporation
10 Pointe Drive
Brea, CA 92821
www.viewsonic.com (800) 688-6688
Made in USA
Parts Included
Attach the Adapter Plate
Attaching to Promethean Arm
1
5- #10 Washers
4- 4mm x 12mm FHMS5- 4mm x 10mm PHMS
Attach Promethean Bracket
2If Dome is not Centered
3
1. Place (4) spacers over the threaded inserts on
the bottom of the projector. Attach Adapter Plate to
Projector with (4) 4mm x 12mm FHMS
2. Attach Promethean Bracket to Adapter Plate with
(5) 4mm x 10mm PHMS & (5) Washers
3. If dome is not centered with lens on installation,
remove Dome from Promethean Bracket.
Attach the Adapter Plate
Attaching to Smart Arm
1Screw in Adapter Plate
2
1. Place four spacers over the threaded inserts on
the bottom of the projector.
2. Place Adapter Plate onto the bottom of projector,
aligning mounting holes on bracket with threaded
inserts on the bottom of projector, and line up with
the center of the projector lens.
3. Attach Adapter Plate to Projector with (4) 4mm x 12mm FHMS
4. Lift Adapter Plate with projector up to end of the existing SMART Board projector mount arm, and slide
interface bracket slots onto hooks.
5. Fasten interface bracket to end of SMART Board projector arm using one 1/4-20 x 3/8" THMS
Bracket at end of
SMART Board projector
mount arm (remainder
of arm not shown)
WALL
1- 1/4-20 x 3/8" THMS
Adapter Plate
TOP VIEW
TOP VIEW
LENS
Align Dome to Len's Center
4Lens is Centered
5
4. Replace Dome on next set of holes on the
Promethean Bracket
5. Dome is now directly over Projector Lens
4- 1/8" Spacers
Promethean Smart Board
4- #10 Washers1/4 Fender Washer Adapter Plate 4- 1/8" Spacer
1- 1/4-20 x 3/8" THMS 4- 4mm x 12mm FHMS

Produkt Specifikationer

Mærke: Viewsonic
Kategori: Tilbehør til projektor
Model: PJ-IWBADP-004

Har du brug for hjælp?

Hvis du har brug for hjælp til Viewsonic PJ-IWBADP-004 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Tilbehør til projektor Viewsonic Manualer

Viewsonic

Viewsonic PJ-IWBADP-004 Manual

2 Juli 2023
Viewsonic

Viewsonic WMK-027 Manual

9 November 2022

Tilbehør til projektor Manualer

Nyeste Tilbehør til projektor Manualer

OmniMount

OmniMount STPWPM Manual

10 Juni 2025
OmniMount

OmniMount NPT Manual

10 Juni 2025
Sony

Sony LMP-E220 Manual

9 Juni 2025
Sony

Sony LMP-H280 Manual

7 Juni 2025
Sony

Sony LMP-H700 Manual

6 Juni 2025
Sony

Sony LMP-D214 Manual

6 Juni 2025
Sony

Sony LMP-H400 Manual

6 Juni 2025
Sony

Sony LMP-C150 Manual

4 Juni 2025
Sony

Sony LMP-H230 Manual

3 Juni 2025
Sony

Sony LMP-H202 Manual

3 Juni 2025