Vimar 01560 Manual

Vimar Ikke kategoriseret 01560

Læs gratis den danske manual til Vimar 01560 (121 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Vimar 01560, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/121

BUILDING AUTOMATION

WELL-CONTACT PLUS

Installer manual

01560

Touch screen KNX in color

BUILDING AUTOMATION

Focus on the treatment of the following:

(1) Under the process of software upgrade, interrupting the power supply may cause the system to fail to start;

(2) Under the process of using MicroSD card to modify the background picture, electronic photo album picture, home page icon and multifunctional page icon, the power sup-

ply may be interrupted, which may cause the system fail to start;

(3) Make sure that the MicroSD card is completely empty before the card is inserted, that is, no data with embedded system firmware is burned, otherwise the system may be

damaged;

(4) If the power supply needs to be interrupted after modifying the setting information, it is recommended that the power can be cut off after 6 seconds when complete modi-

fying, otherwise the modification may not be successful;

(5) If the auxiliary power supply is power off when the screen is on, the screen may display with a tiny flashing after the power recovery in the next time. At this case, let the

device continuously power on for a period of time (maximum around half an hour), the screen will automatically recover to the normal display state.

In the above (1) and (2) cases, the device need to return to the factory for maintenance, please be careful to deal with.