Vimar ELVOX 6680/V03 Manual

Vimar Ikke kategoriseret ELVOX 6680/V03

Læs gratis den danske manual til Vimar ELVOX 6680/V03 (40 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Vimar ELVOX 6680/V03, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/40

TYPE 6680

Cod. S6I.668.00E RL.13 5/2012

POWER SUPPLY FOR SINGLE AND MULTI-RESIDENTIAL VIDEO DOOR ENTRY SYSTEMS WITH “SOUND SYSTEM”

CALL

INSTALLATION AND OPERATION MANUAL

Product is according to CE mark and directives:

- EC Directives 2004/108/CE and following norms.

- EC Directives 2006/95/CE (73/23/CEE) and following norms.

Power supplies constitute SELV sources in compliance with the requirements stipulated in Article 411.1.2.2 of CEI standard 64-8 (ed.

2003).

Production is subject to costant surveillance:

DVE

6680

2/40

GENERAL RULES FOR INSTALLATION

Wiring should be installed in separate lines from electrical

and industrial cables. The use of coloured conductors will

facilitale connections. For the camera entrance panel instal-

lation, please, note that:

A) Camera operates from -5° + 50° C; to avoid overheating,

protected it from sunlight with some form of shelter.

B) Lens must be protected against direct light (sun, car hea-

dlights, etc.).

C) Person to be framed by camera must be illuminated from

the front. If lighting is insufficient use an additional exter-

nal lamp powered directly by the mains.

D) Before closing unit, clean protective glass and lens, re-

peat this operation from time to time.

Power supply type 6680 must be placed in a dry place far

from sources of dust and heat. To facilitate check-ups and

adjustments, make sure that the place is easily accessible.

Fix power supply to wall with proper support and fixing

screws provided with the package or inserting it with proper

DIN module. Before connecting it, ensure that conductors

are not interrupted or short-circuited.

Installation should be made in lines separated from electric

mains. To ensure user safety, all units run on low voltage and

are separated from electric-mains by an high isolation tran-

sformer. It is advisable, in any case, to instal a thermal ma-

gnetic switch with an adequate capacity between the

supplying mains and the unit. When repairing and/or servi-

cing the power supply it will be sufficient to loosen the

screws placed on the front side to remove the front panel,

after having switched off the power.

SAFETY INSTRUCTIONS FOR INSTALLERS

- Carefully read the instructions on this leaflet: they give impor-

tant information on the safety, use and maintenance of the in-

stallation.

- After removing the packing, check the integrity of the set.

Packing components (plastic bags, expanded polystyrene

etc.) are dangerous for children. Installation must be carried

out according to national safety regulations.

- It is convenient to fit close to the supply voltage source a

proper bipolar type switch with 3 mm separation (minimum)

between contacts.

- Before connecting the set, ensure that the data on the label

correspond to those of the mains.

- Use this set only for the purposes designed, i.e.for electric

door-opener systems. Any other use may be dangerous. The

manufacturer is not responsible for damage caused by im-

proper, erroneous or irrational use.

- Before cleaning or maintenance, disconnect the set.

- In case of failure or faulty operation, disconnect the set and

do not open it.

- For repairs apply only to the technical assistance centre au-

thorized by the manufacturer.

- Safety may be compromised if these instructions are disre-

garded.

- Do not obstruct opening of ventilation or heat exit slots and

do not expose the set to dripping or sprinkling of water.

- Installers must ensure that manuals with the above instruc-

tions are left on connected units after installation, for users'

information.

- All items must only be used for the purposes designed.

- The ominipolar switch must be easily accessed.

WARNING: to avoid the possibility of hurting yourself, this unit

must be fixed to the wall according to the installation instructions.

- This leaflet must always be enclosed with the equipment.

Directive 2002/96/EC (WEEE)

The crossed-out wheelie bin symbol marked on the pro-

duct indicates that at the end of its useful life, the product

must be handled separately from household refuse and must

therefore be assigned to a differentiated collection centre for

electrical and electronic equipment or returned to the dealer

upon purchase of a new, equivalent item of equipment.

The user is responsible for assigning the equipment, at the end

of its life, to the appropriate collection facilities.

Suitable differentiated collection, for the purpose of subsequent

recycling of decommissioned equipment and environmentally

compatible treatment and disposal, helps prevent potential ne-

gative effects on health and the environment and promotes the

recycling of the materials of which the product is made. For fur-

ther details regarding the collection systems available, contact

your local waste disposal service or the shop from which the

equipment was purchased.

Risks connected to substances considered as dangerous

(WEEE).

According to the WEEE Directive, substances since long usually

used on electric and electronic appliances are considered dan-

gerous for people and the environment. The adequate differen-

tiated collection for the subsequent dispatch of the appliance for

the recycling, treatment and dismantling (compatible with the

environment) help to avoid possible negative effects on the en-

vironment and health and promote the recycling of material with

which the product is compound.

Produkt Specifikationer

Mærke:	Vimar
Kategori:	Ikke kategoriseret
Model:	ELVOX 6680/V03

Har du brug for hjælp?

Hvis du har brug for hjælp til Vimar ELVOX 6680/V03 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vimar Manualer

Vimar 20479.N Manual

25 Juli 2025

Vimar ELVOX 6837 Manual

25 Juli 2025

Vimar R21509.N Manual

25 Juli 2025

Vimar 16582.B Manual

24 Juli 2025

Vimar ELVOX 8911 Manual

24 Juli 2025

24 Juli 2025

24 Juli 2025

24 Juli 2025

24 Juli 2025

Vimar ELVOX 46862.A01.01 Manual

24 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan VICM24 Manual

16 August 2025

HP Elite Mini 805 G8 Manual

16 August 2025

TP-Link LS106P Manual

16 August 2025

ATen CL1308 Manual

16 August 2025

Testboy Light 400 Manual

16 August 2025

Vulcan VIR1F Manual

16 August 2025

HP Poly Studio X72 Manual

16 August 2025

Supermicro X14DBM-AP Manual

16 August 2025

ZyXEL XGS1935-28HP Manual

16 August 2025

Supermicro A4SAN-H Manual

16 August 2025