Vintec V20SGES3 Manual

Vintec Køleskab V20SGES3

Læs gratis den danske manual til Vintec V20SGES3 (7 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vintec V20SGES3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

V20 SERIES

V20SGES3

1. Cabinet dimensions:

Height 820mm (40mm adjustable feet) Width 295mm

Depth (without handle) 575mm + 30mm spacer = 605mm

Depth (with handle) 575mm + 43mm handle + 30mm spacer = 648mm

2. This cabinet is not designed to be fully integrated behind a joinery door.

3. Please note that a minimum cut out of 300mm x 825mm is required to facilitate instal-

lation, removal, ventilation and servicing.

UNDERBENCH INSTALLATION INSTRUCTIONS

These units are not designed for outdoor use – please see conditions at the end of this

information.

✓

300.0

825.0

Minimum Cutout Diagram

5. This cabinet is front venting. The cabinet draws air from the rear and expels through

the grille under the door at the front. If a kick board is to be placed in front of the venti-

lation grill at the front a grill must be tted in to the kick board with a minimum air ow

allowance of 150cm2.

5mm

4. This cabinet requires 2.5mm clearance on both sides, 5mm at the top and 30mm

clearance at the rear. A ventilation grid MUST be installed in the 30mm clearance at the

rear. Because hot air rises it is imperative that a grille with a Minimum grid size of 200mm

x 40mm is installed at the top of the back wall or on either side at the rear at the top

giving cool fresh air full access to ow into the 30mm gap at the rear of the cabinet. This

means that you must not install the grille close to other appliances such as an oven or to

an area that is sealed or with out access to fresh cool air. (You MUST call the Vintec Ser-

vice Department on 1800 771 776 if you do not understand any part of this statement.

Failing to comply with the above specications could result in WARRANTY void.)

200

Suitable points for ventilation grille.

Note: Only one vent is required.

Benchtop

Correct power point location

Produkt Specifikationer

Mærke:	Vintec
Kategori:	Køleskab
Model:	V20SGES3

Har du brug for hjælp?

Hvis du har brug for hjælp til Vintec V20SGES3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køleskab Vintec Manualer

Vintec VWD050SSB Manual

29 September 2025

Vintec VWS170SSB Manual

29 September 2025

Vintec AL-V30SGE Manual

29 September 2025

Vintec VWD050SBA Manual

29 September 2025

Vintec V20SGES3 Manual

29 September 2025

Vintec VWS050SSA Manual

29 September 2025

Vintec VIN40SGEALRH Manual

29 September 2025

Vintec VWS035SSB Manual

28 September 2025

Vintec V190BVCBKLH Manual

28 September 2025

Vintec V20SGEBK Manual

28 September 2025

Køleskab Manualer

Nyeste Køleskab Manualer

Amana ASI2175GRB Manual

29 September 2025

Asko RBR276DND1 Manual

29 September 2025

29 September 2025

29 September 2025

29 September 2025

29 September 2025

Vestfrost VR-FB373-2E1RD Manual

29 September 2025

Amana GB 2026 Manual

28 September 2025

Miele KFN 4796 AD Manual

28 September 2025

Amana ART348FFFS Manual

28 September 2025