Vintec V20BVCS3 Manual

Vintec Køleskab V20BVCS3

Læs gratis den danske manual til Vintec V20BVCS3 (7 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vintec V20BVCS3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

V20 SERIES

V20SGES3

1. Cabinet dimensions:

Height 820mm (40mm adjustable feet) Width 295mm

Depth (without handle) 575mm + 30mm spacer = 605mm

Depth (with handle) 575mm + 43mm handle + 30mm spacer = 648mm

2. This cabinet is not designed to be fully integrated behind a joinery door.

3. Please note that a minimum cut out of 300mm x 825mm is required to facilitate instal-

lation, removal, ventilation and servicing.

UNDERBENCH INSTALLATION INSTRUCTIONS

These units are not designed for outdoor use – please see conditions at the end of this

information.

✓

300.0

825.0

Minimum Cutout Diagram

5. This cabinet is front venting. The cabinet draws air from the rear and expels through

the grille under the door at the front. If a kick board is to be placed in front of the venti-

lation grill at the front a grill must be tted in to the kick board with a minimum air ow

allowance of 150cm2.

5mm

4. This cabinet requires 2.5mm clearance on both sides, 5mm at the top and 30mm

clearance at the rear. A ventilation grid MUST be installed in the 30mm clearance at the

rear. Because hot air rises it is imperative that a grille with a Minimum grid size of 200mm

x 40mm is installed at the top of the back wall or on either side at the rear at the top

giving cool fresh air full access to ow into the 30mm gap at the rear of the cabinet. This

means that you must not install the grille close to other appliances such as an oven or to

an area that is sealed or with out access to fresh cool air. (You MUST call the Vintec Ser-

vice Department on 1800 771 776 if you do not understand any part of this statement.

Failing to comply with the above specications could result in WARRANTY void.)

200

Suitable points for ventilation grille.

Note: Only one vent is required.

Benchtop

Correct power point location

Produkt Specifikationer

Mærke:	Vintec
Kategori:	Køleskab
Model:	V20BVCS3

Har du brug for hjælp?

Hvis du har brug for hjælp til Vintec V20BVCS3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køleskab Vintec Manualer

Vintec VBS050SBA Manual

29 September 2025

Vintec VBS050SSA Manual

29 September 2025

Vintec V20BVCBK Manual

29 September 2025

Vintec AL-V40DG2E Manual

29 September 2025

Vintec V20BVCS3 Manual

29 September 2025

Vintec V190BVCBK Manual

29 September 2025

Vintec VBS050SSB Manual

29 September 2025

Vintec VWS020SBB Manual

29 September 2025

Vintec VWS035SSA Manual

29 September 2025

Vintec VWS050SSB Manual

29 September 2025

Køleskab Manualer

Nyeste Køleskab Manualer

Marvel MLBV024SS01A Manual

30 September 2025

Caple RI7303 Manual

30 September 2025

Insignia NS-RTM21SS7 Manual

30 September 2025

Insignia NS-CF44BK3 Manual

30 September 2025

Philco PCF 142 F JOKER Manual

30 September 2025

Marvel ML24RIP5LP Manual

30 September 2025

Insignia NS-UZ21WH0 Manual

30 September 2025

Insignia NS-CF43SS9 Manual

30 September 2025

Insignia NS-RSS26WH0 Manual

29 September 2025

Insignia NS-RTM18SS2 Manual

29 September 2025