Vitek VT-1210A-D9B Manual

Vitek Ikke kategoriseret VT-1210A-D9B

Læs gratis den danske manual til Vitek VT-1210A-D9B (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Vitek VT-1210A-D9B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

DC 12 10A 9CHV Power Supply Models - -VT 1210A D9B!

Installation instruction:

1. Install box at desired location in a cool place. The power

supply can be wall mounted. Make the hole position on the

wall using the back of the box as a template and drill four

mounting holes. Screw in the top two holes with the M4

screws and hang the power supply box - then affix the bottom

screws. Use drywall anchors if solid beams are unavailable.

2. Knock out (remove) the appropriate perforated knockouts for

running cables through.

3. When using approved optional backup battery, Connect Red

and Black wire from Battery input Terminal to battery terminal.

Red color is for Positive and Black color is for Negative.

4. Turn power switch to “OFF” position.

5. Connect each camera device to one "+U” & one “-U” power

output terminal. Be careful that the “+” & “-“ match at the

camera as well.

6. 11 Plug the AC plug into local 0VAC power outlet. Turn power

switch to “ON” position. The green LED light should be on

showing power is being supplied to the camera.

7. Close the cover and secure it with provided screw.

Technical Specifications

Each channel is protected with a 1.6Amp,PTC resettable fuse.

Operation the temperature: -14 to +86 degrees F

Storage temperature: -14 to +140 degrees F

Notes:

1. When used in an extreme weather climate the power panel ,

may take up 30 seconds to boot up after initial connection to

power.

2. To avoid the risk of fire use only type STP-2 wire or heavier

gauge No.18AWG copper at minimum. Use wire suitable for

at least 194 degrees F.

! !

Produkt Specifikationer

Mærke:	Vitek
Kategori:	Ikke kategoriseret
Model:	VT-1210A-D9B

Har du brug for hjælp?

Hvis du har brug for hjælp til Vitek VT-1210A-D9B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vitek Manualer

Vitek VTC-IRV30/2810 Manual

6 August 2025

Vitek VTC-IRE40/3516 Manual

15 November 2024

Vitek VTM-LCD155P Manual

7 Oktober 2024

Vitek VTC-C594DN Manual

7 Oktober 2024

Vitek VTC-T4T3HR2MD Manual

6 Oktober 2024

Vitek VTC-THB5RV Manual

14 September 2024

Vitek VTD-VH412VP4 Manual

13 September 2024

Vitek VTC-C960WS Manual

9 September 2024

Vitek VTC-TNB42R3F Manual

8 September 2024

Vitek VTC-IRB424M Manual

8 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

NUX PMS-2 Manual

30 December 2026

Delta 21C122 Manual

30 December 2026

D-Link DIS-100G-06P Manual

30 December 2026

Delta 21C542 Manual

30 December 2026

SilverCrest Cook 'n' Mix SMK 1000 C1 Manual

30 December 2026

NUX HG-6 Manual

30 December 2026

WAC Lighting H-1052 Manual

30 December 2026

Pioneer 2PM440 Manual

30 December 2026

Akasa Pascal A-NUC22-M3B Manual

30 December 2026

Aqprox appLS16HD2D Manual

30 December 2026